Question about Mitsubishi WS-55513 55" Rear Projection HDTV

1 Answer

Nothing works My ws55513 will not turn on at all. If I push the system reset it will blink for approx.60 to 70 seconds then go out. TV will do nothing. Any suggestions will be greatly appreciated.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers
Re: Nothing works

You will need the DM module repaired....requires replacing
four 1000mf 16v 105 degree capacitors with a bit higher
voltage = 25v or 35v.....if too tall, lay them over 90 degrees on
to board.....there are many entries concerning DM module
rebuild...........if you need further assist,let me know...T.

Posted on Jan 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Mitsubishi WS-55909 dm board repair

I have the same TV and the error light code on my set is 22

May 31, 2009 | Mitsubishi WS-55809 55" Rear Projection...

2 Answers

Mitsubishi ws-55515 light blinking

Sounds like the remote is not programed correctly or the input sources have been changed.

Call the cable company and complain that it worked before they came and shoud work afterwards.

Mar 24, 2008 | Mitsubishi WS-55515 55" Rear Projection...

1 Answer

TV won't turn on

Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.

For example, 3 flashes, then 7 flashes = 37.

Here are the error codes, and the corresponding problem:

12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected

Feb 25, 2008 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Mitsubishi WS55513

misubishi, ws55513, clear screen cover, diffuser screen, need some leads as to where to get them

Feb 22, 2008 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

Mitsubishi WS55513 tv

capacitor problem.

Dec 14, 2007 | Projection Televisions

2 Answers

RCA P52753AT tv will not turn on

the High Voltage splitter needs to be replaced

Oct 06, 2007 | RCA P52939 52" Rear Projection Television

1 Answer

Blue screen and shut off by self

You will need to reset the Netcommand and tuner settings in the set. The little indented button in the front of the set needs to be pushed in (when the set is off). The front light will blink for about a minute or minute and a half. Then, reprogram the Netcommand settings. This should solve your problem. If you need more information, then, reply to this post and I will respond.

Sep 23, 2007 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

TV won't turn on

I am having problems turning on the tv. I had lost the remote control so I bought a universal remote which was not working at the time I unpluged the tv form the powersocket then I tryed to turn on the tv the green power light stays on for a few seconds then it blinks two times then there isn't a power light on after that what is wrong

Jul 26, 2007 | Mitsubishi WS-48613 48" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55513 55" Rear Projection HDTV Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66454 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides