Question about RCA DRC6300N DVD Player/VCR

3 Answers

DVD player won't work

My player may read or not read discs, it may display error disc or no disc. I wish I knew what was making it do this. Can someone please help me? It is an RCA DRC630N Portable DVD player.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers
Re: DVD player won't work

Sometimes this is a dirty surface on the Disk. Watching it with a soft cloth and non-abrasive 'gentle' dish soap can help. At least, that's what Netflix tells me to do with them.

If it's happening on EVERY disk, and all you're playing are commercial, new, pre-recorded DVDs, then there's more things to try. Some links from reputable sources:

After all that fails, it's probably time to change the DVD drive inside the player. Sometimes this is easy, sometimes not. :) with the DRC 630N, this would be more in the 'not' arena. :)

Of course, if you have a valid warranty, then when you're left with no solutions that don't void the warranty, you have to decide whether to try to pass it off to the warranty holder for repairs.

Posted on Apr 03, 2008

Re: DVD player won't work

Same problem as above also it will try and read it then just stop or say invalid key

Posted on Feb 02, 2008

Re: DVD player won't work

Same problem as above===put disc in and get no disc or error disc also mine will read then just stop

Posted on Feb 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The display says, "insert disc",

Thank you for posting to and it is my pleasure to guide you.

1. The disc may be turned over. Insert the disc with the playback side facing down.

2. The disc may be dirty. Wipe it with the correct type rag.

Since you stated the display is showing then I take it the player is on and the chord is plugged in.

3. Is the disc completely centered in the tray? I have done that before.

4. Have you run the self-diagnosis function? If the Error code 'AACS ERR' shows then it is an "AACS read failure". Remove the protected disc. Then turn the unit off and wait a minute or two and back on.

Good luck and please post back that you are successful and give thumbs up if my solution has worked for you. If I can be more helpful just reply.

Jun 18, 2011 | Sony BDP-S300 Blu-Ray Disc Player

1 Answer

My LG DR389 Recorder is nearly 2 years old, was working fine until recently, when it began not to read DVD discs recorded by it:the error message "cannot read disc due to disc error"shows up.I noticed by...

A common reason for dvd players to give you error messages like "bad disc", "incorrect disc", "disc not readable", etc is that the optical lens needs to be cleaned. Dust will build up over time and prevent the device from reading the discs properly. Discs that are dirty and have finger smudges or if the discs have scratches will also cause these errors. There are some common mechanical problems that will also cause disc reading problems which you can find in my tips and tricks, just click on the link to read more about them.
You can clean your dvd player two ways, manually or by using a dvd cleaning disc. The following link will provide you with detailed information for doing cleaning the optical lens. I would suggest that you use the cleaning disc because it is easier and much faster. You can also clean your dvd discs themselves using the information here.
I hope that this information helps you solve the problem and you get many more years of use from your device. I wish you all the best. Please let me know if you need further assistance and I will do my very best to help you.

If you would not mind, please rate my help. I would greatly appreciate it. Thank You.

Aug 13, 2010 | LG DVD & Blu-Ray Players

1 Answer

No File and Disc Error message

clean dvd first with cd cleaner.. before you change optical lens. lens cannot read data on your disc.

Sep 09, 2009 | DVD & Blu-Ray Players

1 Answer

Disc Error, Will Not Read Any Disc New or Old

DVD players are ****!! This is my 5th time buying one. It's like the industry is running a big scam because that know that soon all movies will be digital mp3. All of my players give me the same error!!

Jan 04, 2009 | Sony RDR-VX500 DVD Recorder/VCR

1 Answer

Disc error

Recordings are not being finalize. As it starts to finalize it zips through it and then kicks it out as disc error.

Jun 02, 2008 | LG DR787T DVD Recorder

1 Answer

Will not read.

almost any electronic store can help you but i would try factory customer support first it probably cheaper to just buy a knew player

Aug 24, 2007 | Oritron DVD4119

2 Answers

Error message

disc error msg playback may not be available on this

Mar 27, 2007 | Symphonic WF803 DVD Player/VCR

1 Answer

Disc playback issues

dvd will not play. display siad "read"

Jan 21, 2007 | Technics DVD-A10 DVD Player

Not finding what you are looking for?
RCA DRC6300N DVD Player/VCR Logo

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

66579 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you a RCA DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides