Question about Pioneer PRO-1009W 57" Rear Projection Television

1 Answer

No picture shows

You can hear everything but you can't see anything.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: no picture shows


Posted on Dec 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Picture tube for 60 in' mitsubishi it shows only a black screen but you can still hear it

ts will go into shutdown when a vertical issue is present but the audio will still continue to operate normally.

Apr 02, 2013 | Mitsubishi VS-50609 50" Rear Projection...

1 Answer

I have a JVC HD 52g787, the sound works but no picture, The tv comes on, but the blue light just blinks, then cuts off, I have sound no picture

The problem is usually from the power or the Y sustain at the left or right side of the display when one of the large capacitor or heat sync on the capacitor even the flat power cable connection it to a main power board needs to be checked too, if the fuses on the board are blown it will need to be replaced

But after replacingthe fuses and the capacitors and still no solution,youwill need to replace the all board ..

You can also trouble shoot first before going to the board of the TV..

How to Troubleshoot an LCD With Sound But No Picture

It can be overwhelmingly frustrating when an electronic device as expensive as an LCD television set starts having problems. Luckily many of these problems are easily troubleshot. While being able to hear sound coming from your LCD television but seeing no picture may seem serious on the surface, fixing the problem involves checking a few different settings to make sure everything is set properly


Check the video connection of any devices plugged into the LCD television. If you can hear sound but are seeing no picture while trying to use something like a DVD player or cable box, the problem is probably that a wire is loose somewhere. Check the yellow video cables running from the DVD player to the TV and make sure everything is plugged in firmly and where it should be. Also check the coaxial cable running from the cable box (or cable outlet) to the television and make sure that wire is also screwed in securely.

Check the image settings on your television and make sure everything is set properly. Certain settings like "Picture" or "Brightness," if set to one extreme, can make the picture appear completely black. This could cause you to simply hear television shows but not be able to see them. Reset all picture settings on the TV to their original factory default settings to see if that fixes the problem.

Try another channel. If you're watching TV and not getting a picture, the first thing you should do is check a variety of random channels to make sure it is a problem with your TV and not with your television signal. If it is a problem with the television signal it is the fault of the TV station or cable service provider and there isn't anything you can do yourself to fix it.

Try the DVD on another DVD player. If you're trying to play a DVD and can't see any images, make sure the disc isn't defective. Try it on another DVD player or a computer DVD drive and make sure the disc works in the first place.

Hope it helped ..

Jul 17, 2011 | JVC HD-52G886 52" Rear Projection HDTV

1 Answer

I have a 2002 KP-57WS500 sony tv. Whenever i turn it on, it is fine for about 5-10 seconds but then the whole screen slowly fades to blue until you see no picture but can still hear the sound perfecly. I...

Unfortunately, the Blue CRT will most likely need replacement. But you can get the entire assembly as a complete unit which makes it a easy removal and installation since the CRT is a complete one. Heres the link to that Blue CRT

Jun 04, 2011 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Everything that is supposed to be black is showing

Hi,It sounds like a problem with the color wheel or DMD board. The color wheel is a rotating disc that has a gamma of colors it spins at high rpms.The light of the lamp goes through it to create the colors on your tv.When it starts to go bad you will hear ,humming,buzzing,high pitch noises ,you might also experiment color distortion ,black and white picture. This is how the DMD works: Basically the light of the lamp goes through a tunnel that carries a color wheel(rotating disc with a gamma of colors that creates the colors on your tv)then the light of the lamp goes through the DMD board which is a chip composed of around 2 million pixels that creates the images and colors.When it starts to fail it will create black bars,pixelation,color distortion or white dots on screens. Here's a video that will help you find where the DMd chip is located : Have a blessed one!

Apr 29, 2010 | Projection Televisions

1 Answer

I have a mits wd-52525 i got it from my neighbor, he said it needs a new screen,but the outside looks fine, i hear glass when i move it, someone said the mirrors are broke.could there be anything else, and...

the mirror is a single unit and can be purchased from mitsubishi however you will probably have some scratches in the optics eye and this will show in your picture

Jan 31, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Plays dvds on xbox 360 fine, but no picture for games/dashboard

already solved it. thanks. i couldn't see the xbox settings blade because of the blank screen so switched my component cable to the tv setting instead of the hdtv setting, then i could see the dashboard in non-hd and switched the resolution to 720p while simultaneously switching the component cable back to the hdtv setting. that worked.

Jan 02, 2009 | Sharp Projection Televisions

1 Answer

Toshiba 50h81 2001 rear projection hdtv ONLY SHOWS GREEN! PLEASE HELP!

The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer2_bing.gif Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png

Aug 11, 2008 | Toshiba 50H81 50" Rear Projection...

1 Answer

I have a 36 inch enteraint series tv serial #eq24c288y . when i turn it on it stsys on for a few minutes and then goes off ican still hear the audio. sometiles it stsys on for hourd at other times it on...

Please update this with the model number. The serial number is not useful here. The model number should be on the same tag as the serial number.

When the picture goes off, are there any other symptoms at all? Blinking standby light? Anything? Is there a pattern to when it fails? Right at startup, only after a while? How long?

Responding to these questions will help me to provide you with some possibilities.


Jun 06, 2008 | RCA Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

56925 Answers


Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides