Hello. My DC728 drills keyless chuck took a dive. I had no choice but in removing all of the plastic...
(More)
Hello. My DC728 drills keyless chuck took a dive. I had no choice but in removing all of the plastic as well as the 3 jaws and misc spacers. Yes, I did remove the main/lock screw from the shaft arbor, however I cannot remove the chuck body itself.. I have wedged 8'' long screwdriver shafts into the chuck perpendicular to the drill and proceeded to whack the leverage mechanism both counter and clockwise...Which way should I be hitting it? I cannot budge the unit...Does Dewalt use locktite on the threaded arbor shaft? Do you have any other suggestions? I have hit the leverage mechanism so hard in both directions that I can actually get the drills transmission/gears to skip...which I know is not good...I have tried everything but heat... Thanks, Mike
when i plug in the battery to recharge the two lights on the left light up and the battery does not...
(More)
when i plug in the battery to recharge the two lights on the left light up and the battery does not charge. I tried it with two different batteries. Is the charger defective? Thanks