Question about Whirlpool GMC275PD Electric Double Oven
I used the self-cleaning feature and afterwards the oven door remains locked. The oven will work (heat) and the panel functions properly, but the door will not unlock. I have tried using the lock/unlock button and also tried restarting and cancelling the self-cleaning feature.
This seems to be a common problem with these ovens. The oven got too hot and the tco (Thermo cut off)tripped. This will have to be replaced. It is located behind the control board.
Posted on Aug 25, 2007
First off this oven sucks. Now to fix the problem replace the Fuse assembly with #4451042 an $11.00 part. SHUT OFF THE POWER AT THE BRAKER PANEL FIRST. Then open the lower oven door and remove the two small screws that hold the side trim pieces, slide them up a bit to remove. At the top of the track remove two more small screws that hold the display panel in-place and lift the cover up and away from the oven. The fuse is inside of a clear plastic tube with a female spade connector at each end of it. replace the failed part and put things back the way that they came off. Next time don't by a Whirlpool.
Posted on Jul 09, 2008
Check for correct voltage at plug, in the mean time the oven will be disconnected from any power, see if it resets with no power for 10 minutes
Posted on Nov 13, 2008
Self cleaning features are not recommended by most appliance technicians. The ovens are not constructed satisfactorily to expel the 1000 degree heat, Therefore the thermal fuses blow as well as other parts failures.
Remove the oven. Remove the rear panel. Replace the thermal fuse in the back of the oven. Use Easy Off next time.
Posted on May 12, 2009
Tips for a great answer:
Sep 28, 2015 | Smeg Ovens
Jan 23, 2014 | Frigidaire Ovens
May 17, 2011 | Ovens
Nov 26, 2009 | Kenmore 40494 / 40495 / 40499 Electric...
May 17, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
May 15, 2009 | Ovens
Jan 27, 2009 | Jenn-Air JJW8430D Electric Double Oven
Feb 28, 2014 | Whirlpool GMC275PD Electric Double Oven
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: