Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Alarm Code 10 - Meaning Please?

Alarm code 10 Hotpoint Dishwasher FDW80@G what does it mean please?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers
Re: Alarm Code 10 - Meaning Please?

You can download the manual from this link

You will need to contact the service helpline for the explanantion of the F10 display

Posted on Apr 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Error code F31 on hotpoint wd72

I find no F codes for it only E 30 or 31 means motor failure and call service

Mar 18, 2015 | Hotpoint Washing Machines

1 Answer

I have a Hotpont Ultima dishwasher FDW80 its leaking underneath

Here is a tip that I wrote about dishwashers and them leaking.

Leaking Dishwasher


Jan 18, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My wd640 trips after a second of pressing start,

I am not a repair professional. I am just a 78 year old
man who has been making his own repairs for about
50 years. Therefore the dryer ID doesn't mean very
much to me. Over the years, I haven't had much
trouble with my dryers. However I can refer you to where they have very good
trouble shooting and repair information on dryers and
other appliances. I think you'll find what you need
there. If you have an error code you can probably
find the meaning of it there. Good luck with it.
If I have helped you, please rate my advice on fixya.

Nov 27, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Error code F-08


The meaning of F08 is that the heater relay is stuck or cannot be activated for some reason, this has the effect of stopping the water heater from working.
In order to resolve this the only thing you can do is to test the heater, and see if it is o/k.,if it is , then you there is not much else you can do, except call an engineer.
Hoep this resolves your issue. God Bless.

Jul 09, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Cant get out of demo mode

press and hold both the On/Off button and the Start/Reset button until "D off" is illuminated in the display you should then be able to select wash programme as normal

Apr 15, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint wt741 f11 what does this mean

Hotpoint Error Codes.

Hotpoint washing machines are among the most common found in the Uk and like any mechanical device they will occasionally breakdown or develop a fault and need repairs.
Being a very popular make means that most parts supplier will keep there parts in stock and because so many suppliers keep Hotpoint parts stock this also drives competition hence driving down the price of parts if you should ever need them

One problem many people including some engineers face when faced with a faulty Hotpoint washer is knowing what the error code mean, so here are a list of error codes and there meanings for Hotpoint washing machines

These error codes can some times have a E in front of the number and not a F as shown here, but the meaning of the code is still the same

# F11 - This means there is No hot fill.The ambient temperature is probably below freezing perhaps due to the plumbing becoming frozen. Also verify that the taps are on or if the drain hoses are kinked.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Dec 26, 2008 | Washing Machines

2 Answers

On a hotpoint aqualtis aqxx149pm i get error code f8 flashing

F8 means that heater relay cannot be activated, you need to call an engineer.
Could be expensive, possibly a new control board needed

Nov 19, 2008 | Hotpoint WMA35 Front Load Washer

2 Answers

Hotpoint WF860

here is the list of code meaning from hotpoint.

  • F10 - No cold fill. Check that the taps are on or if the drain hoses are kinked.
  • F11 - No hot fill.The ambient temperature is likely to be below freezing possibly due to the pipes being frozen. Also check that the taps are on or if the drain hoses are kinked.
  • F12 - No mixed fill. It is likely that the water is not turned on at the taps.
  • F13 - Check the water supply, inlet valve and hot and cold hose connections.
  • F14 - A fault with the water heating has occurred. Book a service engineer
  • F15 - Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not blocked.
  • F16 - Extremely high water level Disconnect or turn off the water supply and ensure that the water level does not rise any more. Then Book a service engineer.
  • F17 - Door not closed properly. Close door firmly at the 3 o'clock position.
  • F20/1 - The thermistor resistance has drifted or the temperature scanning sequence is incorrect. The ambient temperature could be below freezing. Book a service engineer.
  • F30/31 - A motor drive problem has occurred. Try running the programme again. If the problem persists book a service engineer.
  • F40 - Water below protection level during a heat step. Book a service engineer.
  • F41 - Water level detect sequence incorrect. Book a service engineer.
  • F50/51 - Customer language and wash programme have not been saved. The system will run with default conditions (1000rpm max and English language). Book a service engineer to re-programme your product.
please do not forget to rate and comment about your experience with fixya.

Aug 17, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Dishwasher fdw80

The clog is going to be in the water pump.Remove both pump hoses and look for the blockage inside the pump and also the two pump hoses.

May 19, 2008 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 1 Expert

5 Answers


Level 1 Expert

47 Answers


Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides