Question about D-Link DI-634M Wireless Router (DI634M)

1 Answer

Wireleess router wont work PLEASE HELP!!!!!

Hi bought it today and i tried to install new firmware didn't work so i thought i would go to install hardware from hard disk and it said restarting router and then after a bit it said page cannot be shown and i reset it and i everything and still cant connect to the internet or even get into the router setting please i can't get into the router settings and can anybody please tell me what to do i am have a Motorola modem and its connected to the router and all it does when i connect it is says connection limited and has the ! over the network picture and internet does not work and i cannot go into the router settings

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

You will need to logon the router via the computer, and create a PPPOE internet connection. The user manual that came with the router will show you how to do this. If you do not have the manual. Do the following: open internet explorer in the address window type the IP of the router "example" your router IP should be on the bottom of the router. If not click start/run, type ipconfig at the > the router ip is listed at "default gateway". once you get to the routers logon page enter one of the following: username "leave blank" - username " admin " -or- username "admin" - password 1234. once logged on the router go to internet connections and select PPPOE enter the username and password provided by your ISP save the settings and you should make the internet connection now. BPCS

Posted on Dec 30, 2007

  • Jim Bruner
    Jim Bruner Dec 31, 2007

    May I ask you what is inappropriate about my suggestion? BPCS



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My epson sx215 wont use my new black ink

Help me please my Epson Stylus SX215 black ink won`t print. I cleaned the head 3-5 times and the nozzle but it still wont`t print black , it is brand new.Is it because the printer didn`t work maybe 2 months. Yesterday i bought all inks and the other are working , the black no :[ please help

Aug 04, 2012 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Printer connected to a Asus router RT-n56u via usb port System with Windows 7 Ultimate 64Bit Usb port enable through Asus Printer Utility Driver select (auto) during installation SAMSUNG UNIVERSAL PRINT...

I'm having the same issue with the same router and printer (mine is CLP-300/XXA).
At first when I try t print a pdf file or an image or any text/word document file with pictures/images I get an SPL-C error.
I have upgraded the firmware and it worked great on my laptop! Then, I tried to install the printer driver on my desktop, but now none of them work correctly.

Still not solved, but here are some suggestions:
1. Try to upgrade the firmware. 2. Try to install the original samsung printer driver 3.0.1
3. If it didn't work try to install the updated driver 3.0.4 4. If it didn't work try to install the Universal Printer Driver
5. IMPORTANT: between uninstalling and installing driver, disconnect both printer and router A/C power adapter and try to reboot you PC after removing the previous driver!
I'm going to work on it and see if it works. The DD-WRT firmware solved the exact same problem on my previous RT-N13U router, but unfortunately DD-WRT doesn't support RT-N56U yet!
Note: I called ASUS and they told me that Samsung printers are not supported for printer sharing server :(

Jun 19, 2011 | Office Equipment & Supplies

1 Answer

I have a netgear WPN824v2 wireless router. I have just bought an iphone 4 and although I can get onto the wireless network, I can't see the interenet. Any thoughts appreciated

Some things to try:
1) Check the current version of firmware on your WPN824v2. If it is older than version 2.0.26, then try downloading and installing the firmware update to see if this resolves the issue.

Firmware Update: (click here) [Note: directions for performing the update are on this page as well]

2) Check whether disabling IPv6 on both laptops makes any difference. If you need help doing this, please ask me in a reply.

3) Verify that both laptops are using automatic (DHCP) IP address assignment

4) Verify that MAC address filtering is not preventing the second laptop.

Again, if you have any questions about how to do any of these checks, please feel free to send a reply. Also if after we're done with this session and you are happy with the information provided, please consider rating it with 3 or 4 thumbs-up.

Thanks for using FixYa and Happy New Year!

Jan 02, 2011 | NetGear RangeMax WPN824 Router

1 Answer

New router as of today Belkin F5d8236-4, wont connect

You will need to configure the router manually

Tell me the name of your internet service Provider ??

Dec 31, 2009 | Belkin F5D8236-4 Router

2 Answers

Router wont work with new modem

Hello Ladoof,
We offer support for Comcast supported routers because they are widely used in the world today. If you are using one such router and it has stopped working, then you just need to call us for instant support.
Comcast Tech Support Internet Help Toll Free 1855 856 2653

May 08, 2009 | Blitzz Technology Computers & Internet

1 Answer

Problem connecting my linksys WRT160N to pc.

Reset the router to factory defaults and reconfigure it. In case it doesn't work then try upgrading the firmware on the router. This should fix it.

Jan 31, 2009 | Linksys WRT160N Wireless Router

1 Answer

Help!!i bought a new psp and i cant install custom firmware...

alright u dont have custom firmware u can not flash a psp 3000 so just get the chickhen mod it is limited but hey what works works right? anyways just look it up on google or youtube and u should find out how to use it i dont use it but my friend does.

Jan 09, 2009 | Sony PlayStation Portable (PSP) Console

1 Answer

My wireless router wont work

Run a cat5 cable from the laptop to a cat5 port on the router, open internet explorer in the address window type or what ever the IP address of the router once you have accessed the router create your PPPOE internet connection, enter your Internet Service Provider's username and password. Once you have done this, disconnect the cat5 cable and connect wirelessly to the router from the laptop. If all this fails press and hold the reset button on the back of the router for 10-15 seconds this will reset the router to factory defaults. connect to the wireless router and create the PPPOE connection. BPCS

Dec 29, 2007 | D-Link DI-634M Wireless Router (DI634M)

2 Answers

Wireleess router wont start

Try putting a cat5 cable from the computer's network port to a cat5 port on the router then on the computer open internet explorer in the address window type the following but use the IP address of the router "which is the Deaut Gateway" it will be on the bottom of the router and also in the manual that came with the router, -or- use the username and password in the manual, the username will either be admin with password of 1234 -or- the username field will be left blank with the password of admin. after you logon the router's setup page you can configure the router as you desire. be sure and create the PPPOE internet connection on the router use the username and password that your internet provider gave you. BPCS

Dec 29, 2007 | D-Link DI-634M Wireless Router (DI634M)

2 Answers

D-link 634M wireless router problem

Assuming wireless connection is enabled in the router(if you have the option), and it was set up initially through a RJ45 lead; make sure the router is not using 108 mbps streaming, as your laptop probably only has 54 mbps capability. See if you can set it to 54 mbps and re-start router.

Dec 11, 2006 | D-Link DI-634M Wireless Router (DI634M)

Not finding what you are looking for?
D-Link DI-634M Wireless Router (DI634M) Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18419 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides