- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity, toss in some CAPS, add the Magic word.
Strangely there is no owners manual but there is a Service Manual for it. It appears that it is actually a 'JVC FS-2000GD'? Normally turning off the alarm just requires pressing the Alarm Set button one more time to toggle it off.
Or you can disconnect it from the mains, remove any back up batteries if it has them and it will reset everything. Then set the time.
on 8 pins you have two grounds black wire and copper screens
connect both to a flying wire
you can use a beep test digital meter {2$ type} to find the TX line
white or yellow is usualy audio to the radio from the mic
and thats it
oh yey too find the ground on the radio look up its details
you can use the beep test also to its neg wire {not the case it floats not + or -}
mic
the case is for the screen wires coppers
the black wire is ground on the mic plug only
the white or yellow will be audio to the radio
the orange or blue will be TX enable and gets shorted to the ground black when you press the TX key
so armed with this
good luck and happy festive season....!!!
For direct frequency input: i.e 2061.4khz transmit - (TX), (2), (0), (6), (1), (4), (ENT) - use (RX) for receive frequency.
For ITU channels - (CH), (4), (1), (2), (ENT)
Direct frequency inputs are restricted to authorized marine band frequencies.
Dear ravibabu872
You can solve it by calling network service provider(cellone) they will send you the settings.
CellOne all India Help '1800 180 1503' or '1503' or dial your customer care number.
If you have a nice Stihl dealer he (or she) might be nice enought to print you the specific repair information that you may need but no place that I know of offers the complete manual for free.
where are you and your fs1502 located?
contact me [email protected]
sailmail - winlink service
winlink station ea8rct + ea8ayt
las palmas de gran canaria
tel. +34 626 314933
hello
you send me manual service radio fs1503
×