Question about Philips HDD070 MP3 Player

1 Answer

Gogear became dead suddenly

JUST BEFORE 2 MONTHS MY GOGEAR(HDD070)BECAME DEAD,EVEN I CAN'T ON ITS POWER.ONLY IF I SUPPLY ITS POWER THEN ONLY ITS SCREEN LED IS ON,BUT NO LETTER IS APPEARD IN ITS SCREEN.PLEASE HELP ME TO GET MY GOGEAR BACK.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 476 Answers

Battery is too low for player to charge. There is a firmware fix for this at www.p4c.philips.com

Fix cannot be applied until player is working again.

If you know someone who has the same player, put their battery in your unit to power up and apply firmware update to fix problem. Then swap batteries back again

Another way to get the player working is to remove the side panel to disconnect battery. Plug in the mains charger and reconnect the battery. You may need to do this several times before the player springs into life.
If this doesn't work try disconnecting the charger and battery alternately and wait 5 secs between attempts.

Posted on Feb 08, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gogear hdd070/05 mp3 player incompatible with Vista


uhm if you still have the discs the mp3 player came with put them in the laptop or just download windows media player then it should work

Apr 02, 2009 | Philips Audio Players & Recorders

1 Answer

I have a Philips Gogear Mp3 player. suddenly I'm not able to switch on the power supply and i tried charging it for 4-5 hrs.no Use. It's just 4 months old. can u help me?


It's dead. The HDD models are basically obsolete - you may have purchased it 4 months ago, but it was manufactured 3 years ago. Here is the basic troubleshooting to be sure, but it won't work:

Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Dec 12, 2008 | Philips GoGear HDD1830 MP3 Player

1 Answer

My mp3 player is stuck on one screen


hold power and vol up same time 4 5 sec will rebbot

Aug 24, 2008 | Philips GoGear HDD6330 MP3 Player

1 Answer

I have a Philips GoGear MP3 player hdd070/05. I would like to know what software to download to transfer music from CDs to the MP3 player. So far all my attempts have failed. If possible I would very...


I have formated the philips gogear hdd070/05, the screen shows problem!connect to computer,
my driver cd has already crashed out so please help.

Apr 26, 2008 | Audio Players & Recorders

1 Answer

Dead after false upgrading


Hit volume + and reconnect the GoGear to the computer - after several seconds of holding the volume + button, Windows should reload the drivers.

Mar 27, 2008 | Philips GoGear SA178 MP3 Player

1 Answer

Problem With Turning On


Make sure you back up all songs on the GoGear before attempting this solution.

1) Back up all files on the GoGear
2) Open up Philips Device Manager (Start --> All Programs --> Philips)
3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button
4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new

Now you can do the firmware upgrade that will prevent this problem from occuring in the future. Open up Philips Device Manager and click the Update tab. This problem was caused because most GoGear's were designed for Windows XP with Media Player 10 (which is no longer the latest standard).

-Tha Mp3 Doctor

Jun 08, 2006 | Philips HDD070 MP3 Player

Not finding what you are looking for?
Philips HDD070  MP3 Player Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Audio Players & Recorders Experts

Gyula Lacz

Level 3 Expert

486 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Are you a Philips Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...