Question about Jetway V266B Motherboard
I'm planning to upgrade a little to my old PC just to add up speed and stability...I'm searching for a RAM could support to it, but I haven't found 512MB PC2100 DDR RAM....so could I install PC400 or other PCXXX DDR 512MB to this motherboard cuz it states in the manual that it supports PC133 of SDRAM & PC2100 DDR RAM.....plz help...
I very appreciated for good solutions...CHEERS! for fasr reply :)
I have been using my my Jetway V266B motherboard with 256MB of some unidentified PC2700 RAM for at least a couple of years and it seems to be pretty stable with no problems. I had the BIOS set with the processor (Athlon XP2400+) set to 100MHz and the memory at 133MHz. I don't know whether that is lucky although I should be expected to be OK since you are just underclocking the RAM a little bit.
I have just ordered another 512MB of PC2700 from Ebuyer. I''m keeping my fingers crossed that this will worK OK with my existing RAM when I fit it.
Posted on Dec 31, 2007
I suggest you stay within your manual specs.
Your boards memory should not use voltage higher than CL2.5
Below is a link for 1Gb dimm DDR266 PC2100. CL2.5
You can also buy two which would take you to the motherboards MAX memory of 2Gb.
Posted on Dec 30, 2007
Tips for a great answer:
Aug 10, 2011 | Intel D915GLVG Motherboard
Apr 09, 2010 | Foxconn K7S741MG-6L Motherboard
Jan 13, 2010 | ASUS Intel 845D Chipset P4B266 (P4B266-PA)...
Aug 26, 2009 | ASUS PSCH-L Motherboard
Feb 20, 2009 | ASUS P4B266 Motherboard
Mar 21, 2008 | Foxconn P4M800P7MA-RS2 Motherboard
Jan 23, 2008 | Jetway V266B Motherboard
152 people viewed this question
Usually answered in minutes!