Question about Emerson HDC2R Humidifier

3 Answers

800 humidifier When I took the parts apart to clean it was a while before I got a replacement filter. DO you have assembly pictures to tell me where everything goes. I have a little plastic part to hold the float and can't figure it out. Also which way does the filter go in?? Seems loose one wae and tight the other . Thanks Adrienne edgeonover@yahoo.ca

Posted by on

  • jbarta Jan 02, 2008

    I'm having the same problem. Can't recall how the filters fo in and how to reinstall the float. I have the kenmore 14416.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can't remember which way filters go in on the emerson hdc2r and are there four for it or just two

Posted on Feb 06, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Assembled Pics
800 humidifier - 509487f.jpg

Posted on Jan 23, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Need model and make can help

Posted on Dec 30, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vibration in water feed


I have a General Aire humidifier on my furnace. I was having the same issue with vibration noise. I took the solenoid off and took it apart. There is a part that had a screen and a very small hole. I cleaned all the parts in my ultrasonic cleaner. The I reassembled the solenoid. It had an electromagnet that was held on by one nut. I reinstalled the solenoid mechanism and started the system. I had way better water flow, but still some vibration. I tightened the nut holding the solenoid and electromagnet together and the vibration stopped.

Jan 22, 2013 | General Filters 1099-LH Humidifier

1 Answer

Can you tell me what filter the Vicks Warm Mist V745A 1 Gallon Humidifier takes?


did you figure out the filter? there is a filter there when you take it apart but it doesn't say anything in the manuel about changing a filter. let me know if you figured it out. thanks

Mar 06, 2010 | Vicks Warm Mist V745A 1 Gallon Humidifier

1 Answer

Hi, I was cleaning my nearly new V150SG and one of the black rods broke. Any chance I can just find replacement parts? Many thanks! Carol cglongmont@yahoo.com or here!


I took my humidifier apart to see what was wrong with it and saw the carbon electrodes were caked with salt deposits. While cleaning them off, one of the electrodes broke about halfway down. I noticed the electrodes were hollow - about a 3/16" diameter hole down the middle.
I found a small diameter screw from a toggle bolt assemble, cut the head of the screw off, cut the remaining threaded piece to about an inch long and used it to splice together the broken carbon electrode. I reasoned that the steel piece is only touching the carbon pieces, and not the wire leads, it should be ok/safe resistance-wise. I put everything back together again, and voila, the unit worked!

Feb 12, 2010 | Vicks V150SG 1 Gallon Humidifier

2 Answers

Need to replace the hb1 valve (mfg part mh26533) on my honeywell Enviracaire Elite whole house humidifier but cannot find it locally and no luck so far on the web


Put the humidifier number, not the solenoid number, into Google or directly at www.appliancefactoryparts.com . They show a breakdown of the humidifier and let you order replacement parts. I've just ordered the solenoid assembly, which they say is in stock.

Jan 27, 2010 | Honeywell Humidifiers

1 Answer

Where does the filter go. I have no instructions or pictures of the filter in place


Go to www.kaz.com

They have the manual (you can print) and it shows a view of how everything assembles. The also have replacement parts.

Hope this helps.

Jan 08, 2010 | Vicks V3100 1.2 Gallon Humidifier

2 Answers

I have a Cool Mist V3500 humidifier. The fan


TRY POURING IN SOME WHITE DISTILLED VINEGAR AND RUNNING IT. THE VINEGAR LOOSEN UP ANY SCALE AND JUNK. AFTER RUNNING UNIT FOR AWHILE, DRAIN OUT ANY REMAINING LIQUID AND ADD DISTILLED WATER OR FILTERED WATER. RUN UNIT AGAIN. THEN DRAIN OUT ANY LIQUID. NOW THE UNIT SHOULD WORK AS NORMAL. IN THE FUTURE, TRY USING DISTILLED WATER OR FILTERED WATER.

Dec 13, 2009 | Vicks Cool Mist V3500 Humidifier

1 Answer

Unit only works upside down!


there is a water level next to the ocilater make sure that the canal is clean. try some water and vinegar

Apr 07, 2009 | Venta VS 100 Humidifier

1 Answer

Replacement HEPA filter for Danby DHCC6020?


We just ordered from Danby... call 1-800-26-danby... it's part number 6020.02

Nov 23, 2008 | Danby PHD DHCC6020 3-in-1 Home Comfort...

1 Answer

Bonaire BCM-645


To replace the filter, follow the steps below
1. Turn the unit off and disconnect from the electrical outlet.
2. Remove the reservoir from the housing.
3. Unlock the housing from the base by turning the lock
knob to the unlocked position
4. Lift the housing straight up and place to the side
5. Unlock the wick holder from the base by turning the
lock knob to the unlocked position
6. Remove the wicks from the wick holder
7. Follow the weekly cleaning instructions.
8. Insert new filters into the wick holder and lock the wick
holder back onto the base.
9. Replace the housing onto the base and lock it into
place.
10.Fill the reservoir and place back into housing.
11.Repeat Operating Instructions It will take about 30 minutes
for the humidifier to reach maximum output. You
can purchase replacement filters (model BWF100 filters)
at your local retailer, by calling 1-800-253-2764, filling
out the accessory card, or by visiting
www.bionaire.com. It is recommended that a
replacement filter is purchased for uninterrupted use.

Here is a link for the manual for your humidifier:
http://www.appliancefactoryparts.com/content/pdfs/117223.pdf

Good Luck.

Apr 24, 2008 | Crane Frog EE-3191 1 Gallon Humidifier

1 Answer

Aprilaire 550 humidifier


You can call 1-800-955-7075 give them the make and model #.The part # should be 4217,10x113/8 frame for $14.56 plus shipping

Nov 20, 2007 | Aprilaire 550 Humidifier

Not finding what you are looking for?
Emerson HDC2R Humidifier Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Humidifiers Experts

Paul Carew

Level 3 Expert

3335 Answers

Dennis

Level 3 Expert

332 Answers

Marvin
Marvin

Level 3 Expert

82285 Answers

Are you an Emerson Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...