Question about Kenmore 4292x Front Load Washer

3 Answers

4292x blinking cycle light

No matter what cycle i push light just blinks on that cycle no owners manual to help

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The manual is behind the front cover. My guess if it's not the switch, it is the CCU computer under the top cover

Posted on Apr 01, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You may have broken off the the door switch. Just above the square that the door latch fits into there should be a small button sticking out. It's only plastic and can get sheared off very easy. If this is broken the machine thinks the door is not closed and the selected cycle will just blink.. If broken you will need to replace the door latch assembly.

Posted on Mar 02, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Click on Kenmore (below FIXYA) on this website, type in your model number & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, you have your manual on line.

Try pushing the "end of cycle" button.

Posted on Dec 30, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool dishwasher model# gu2200xtss3 normal light flasing all the time turning power off does not help in a few minutes back on flashing


The light blinking is an error code--usually it will blink a certain number of times, pause, then blink another sequence(ex. 4 times, then 3 times)in a binary error code. There is a chart in the service manual to decipher the code(s) and locate the issue. It could be anything from a heater circuit failure to the drain pump being jammed. Try to see how many times the light blinks, and which ones blink--there could be, on the first part of the sequence, normal light, then, 2 or 3 lights blink-- I need to know which ones are lit. Thanks! You can try to look up the light combinations on the net with a search for your model number and error codes.

Oct 12, 2015 | Whirlpool Dishwashers

1 Answer

Lt758s push start wash blinks and machine beeps 6 times and medium and high level lights blink and Machine won't go


Owner's manual troubleshooting should help. No Owner's manual? Try MFG website, or email their customer service, or try: manualslib.com You may be able to find a "repair" manual via google search for machine and error codes.

May 07, 2015 | Washing Machines

1 Answer

Fisher Paykel DS605i single dishdrawer with a user-supplied integrate panel. There are three buttons on front. The left-hand button is power button; the center button is start/pause; and the right-hand...


Hello, Thank You for using FixYa. I will be helping you today.Are any of the cycle lights lighting up like rinse and normal and is the light on front blinking and pausing if so how many times is it blinking? Try turning the power off too the unit for five minutes and back on, because if the lid was open some or was stuck it can stop the unit from running.
Thank You and please ACCEPT my answer and Rate my answer if it was helpful..

Jun 29, 2011 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Blinking lights and frozen unit, won't unlock or do anything


Ours did the same thing. It had not been installed corectly. Try pushing in on the door then push the re-set button, it can take up to 90 second's to re-set, if the door isn;t fully shut it will continue to beep. If this doesn't work, unplug the unit for a few minutes to see if it will re-set. Good luck. We were up most of the night trying to find the owner's manual. Finally found 1 on GE's web-site.

Sep 07, 2009 | General Electric Adora GHDA670N Built-in...

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

1 Answer

Blinking red lights and no washer operation


Dave, glad I could help, I'll mark this one as solved.

Jun 12, 2008 | Kenmore 4292x Front Load Washer

2 Answers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I just read this for the same problem: push sanitize, then heat and dry, sanitize, heat and dry, sanitize, heat and dry, cancel, then open and close the door. It worked. The dishwasher is running correctly even as I type this. 

Feb 11, 2008 | Kenmore 24 in. 17262 Built-in Dishwasher

Not finding what you are looking for?
Kenmore 4292x Front Load Washer Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

fordexpert

Level 3 Expert

5690 Answers

Whirlpool
Whirlpool

Level 2 Expert

408 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...