Bosch Axxis WFL 2060 Front Load Washer
Problem for Bosch Axxis WFL 2060 Front Load Washer

Fabric softener doesn't leave the dispenser




By katrina_jahn on Oct 21, 2009

" "
The fabric softener doesn't leave the dispensing tray in my Bosch Washing Machine. I have pulled the tray out and cleaned the black gunk, but is there a particular cycle that I must use to have the fabric softener come into play during a wash? I tried Rinse Plus, but that didn't work. What other problems might there be associated with an error such as this?

Best Solution

posted on Oct 23, 2009
Helpful)

57 varieties

Rank: Guru  Bosch Washers & Dryers  Expert
Rating: 88%, 523 votes
Take out the drawer and clean the compartment and pipe at the end of the drawer with hot soapy water - washing up liquid works well. Clean all around it. To show this is working OK, put it in the sink and fill up the compartment with water until it is overflowing then stop. The water should drain out of the compartment on its own.

Next, where the drawer fits in the machine clean the water exit above the drawer with a washing up brush. This can appear brown or white depending on your water type. If this is OK try running the machine. If there is still a problem, remove the drawer again and turn off the power at the mains. Use something like a paper clip to poke all the holes in the water dispenser area above the drawer. There are lots of them so some patience might be required. If you live in a hard water area it could be blocked with limescale in which case an application of a descaling mousse or spraty will assist. Once complete, make sure you rinse the drawer area, drawer and put the drawer back in and run the machine on a short cold fill wash cycle. Put some fab con in the drawer to test that the machine drains it correctly. If all is well then there will be no fab con left. If it is still there then you will need to get into the water dispensing area to see what is wrong. Occasionally the mechanism can get jammed, lose a spring or just get broken, in which case it will need replacing.
Was this helpful?
Yes
No
2 people thought this was helpful

Popular Solutions for Bosch Axxis WFL 2060 Front


Questions and Unsolved Problems for Bosch Axxis WFL 2060 Front


Do you recommend Bosch Axxis WFL 2060 Front Load Washer?
Answer

Answer
tear in the gasket, rust under the lip, not sure whether to grind off the rust and repaint or... (More)

Answer
what do the symbols (* or l, ll )on the detergent dispenser mean?

Answer
front plastic of door is falling off, runs fine without but want to reconnect?

Answer
Washer doesn't complete cycles. Stops with time still on the timer. Will indicate time indefinately... (More)

Answer
I'd like to use liquid bleach in the washing machine, but there is not a dispenser labeled for... (More)


Didn't find what you were looking for?

Describe your problem:

Select a Category:







Ask our Experts

 

Solve Your Problem Now!
Chat Live with an Expert
Chat Now
Browse popular Problems
More Common Problems
Most Common Problems for:
For Bosch Axxis WFL 2060 Front...:

Top Washing Machine Experts

Rank: Guru Guru  

Solutions: 14805
Member Since: June 2008

Experience: 40 years of automotive repair work, home appliance repair experience and general electrical repair.

Ask Me
Find more Washing Machine Experts

Top Washer & Dryer Repair

(877) 477-7278
Washer and Dryer parts delivered overnight...
AppliancePartsPros.com

(800) 357-1234
Welcome to Action Appliance Repair. We have...
jay_action appliance repair


       
Solve Your Problem Now!
Chat Live with an Expert
Chat Now

X
Continue
When the original poster rates a solution that was given to his own problem, that rating is locked!
X

Are you sure the solution content is Inappropriate?
   
Tech buddies can communicate directly to answer questions. Become a Tech Buddy and have direct access to your favorite expert for FREE!
Insert Link
Insert Image
Insert You-Tube clip
Insert List
Insert List
Spell Check

What is this?



Select