Question about JBL JRX118SP Microphone

1 Answer

Yamaha AW16G Hi, I have owned a Yamaha AW16g Multitrack for some years but recently have encountered a seemingly fatal error. Upon turning the unit on, the display reads, "RECORDER RUNNING", And wont let me perform any functions at all. I have spoken to Yamaha who told me that there was an error with the hard drive and to format it but the unit wont even let me format the disk!! I was wondering if you dealt with repairs on such a unit as this and if the problem can be rectified. Any help or advice you can give would be much apeeciated. Many Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: yamaha AW16G

Maybe you could remove the hard drive and install it in a computer or laptop and then use the computer to format the hard drive.
But this would totally erase the hdd and then you would have to re-install the operating system.
I believe the recovery disk that comes with the unit would re-install the OS, but I'm not sure.
Maybe contact Yamaha and ask them if this method would work.
I hope this helps you.

Posted on Aug 09, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I add another instrument to a song once I have recorded the first?


You will need multitrack recording equipment.
Or a multichannel soundcard with your computer.


Jul 03, 2012 | Microphones

1 Answer

Yamaha MY16-MLAN 16 Channel mLan Expansion Board purchesing in india

Try getting the latest drivers for your device from here:

Feb 28, 2011 | Yamaha MY16-MLAN 16 Channel mLan Expansion...

1 Answer

Shure SM58 A singer has joined me with her own SM58 ,i have to turn the volume up much higher on mine ,with a more muffled sound .This is causing a prob .The PA is a Yamaha Stagepas 300

Please get the microphones checked seperately If there is an impedance difference orr if the coil is damaged then this difference of sound is possible.
So just check it out or else replace the mic.

Sep 13, 2010 | Shure SM58 Professional Microphone

1 Answer

Sennheiser SK 100 Bodypack Transmitter won't power up.

Hello. I Am Not Familiar With This Exact Model, But I Have And Still Do Own A Number Of Wireless Units. There Are A Number Of Things That Can Go Wrong, But If The Unit Wont Power Up, I Would First Check The Battery Compartment For Loose Battery Connections. Over Time They Can Weaken Or Just Get Bent The Wrong Way. Then I Would Look For Loose/Unsoldered Wiring. I Have Encountered Many Cases Where The Battery Compartment Contacts Become Loose , Or The Wiring Going To It. Good Luck

Nov 06, 2008 | Microphones

1 Answer

For Tascam DP02 can't record and listen


Assuming your PA is a Yamaha STAGEPAS (although I thought 500 watts per side was the biggest one you could get). Anyway, on your PA's panel you will have the karaoke machine(s) plugged into the CD ins (top of the panel), while closer to the bottom you'll see the 'monitor outs' L and R 1/4 inch jacks. These are where you'd run the L and R from the PA into your Tascam (or L alone for mono out). The monitor outs are line level and are good for independently powered speakers, recording equipment, mixers etc. Just avoid using any outputs labelled 'speakers'.


Oct 25, 2008 | Tascam DP01 All-In-One Recording Package...

2 Answers

Yamaha pormix 01

Call yamaha directly for parts and service.
They must support unit for 10 years

Feb 25, 2008 | Microphones

1 Answer

Tascam DP-01 FX/CD Digital Portastudio

Here's a link to a forum where someone else encountered the same error. Seems it was due to running out of disc space in that instance.

Dec 04, 2007 | Tascam DP01 All-In-One Recording Package...

1 Answer

Hooking up my mpc2000xl to dp01

The DP-01 does not have a MIDI-In function. Instead, it allows you to plug the MIDI device into the signal chain. Plug the MIDI device into the DP-01 by using the MPC2000xl analog 1/4" jacks on the back, marked "Stereo Right" and "Stereo Left" (right next to the headphone jack at the rear top left). Run those 1/4" cables to the front of your DP-01, into the 1/4" jacks provided.

Hold the Assign button on the DP-01 for the LEFT channel and touch the REC key for the channel you want to assign it to - the REC light will flash red to let you know the routing was successful. Do the same for the RIGHT channel.

You should also plug the MIDI-Out cable from the DP-01 into the mpc2000xl so that the clocks of the devices can be synchronized.

Nov 14, 2007 | Tascam DP01 All-In-One Recording Package...

Not finding what you are looking for?
JBL JRX118SP Microphone Logo

Related Topics:

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top JBL Microphones Experts


Level 2 Expert

611 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JBL Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides