Question about Electrolux UltraLux 2000 Bagged Canister Vacuum

2 Answers


I need a replacement power nozzle,model #N1158. It snapped off the extension wand.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 75 Answers

To order a new power nozzle head call (570)326-1731 and ask for Liz or Steve.

Posted on Jan 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I assume that you are talking about the power head for cleaning carpets. If so I have a spare.

Posted on Jan 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Electrolux Guardian Encore E and the power head quit working. It has suction power head off and all other attachments work.

Try this. Remove the power nozzle from the lower wands. Remove the wands from the hose handle. Snap the power nozzle directly to the hose. Make sure all switches are turned on and try it. If the power nozzle now works, there's an issue with one or both of the wands. If the power head does NOT work, you've secluded the problem to the power head. With that being said and although it could be a power nozzle switch or a wire that disconnected inside, it's most likely the power nozzle Elbow assembly wiring that's worn out. This has been an issue with this model after so many years and you simply need to replace the Elbow assembly.
I hope this helps and let me know if I can be of any more help. Hope this helped. :-)

Apr 02, 2015 | Electrolux Vacuums

1 Answer

Electrolux EL7055 powerhead not working

Have you tried testing the continuity in the hose, wand, and power nozzle? You can also try putting the hose directly in to the power nozzle. If you still need help with you electrolux vacuum try contacting

Nov 17, 2013 | Vacuums

1 Answer

My wand on my canister began to spark and snap and smoke. The element was melting. and now I am stuck with only a working canister. the elememt or electrical hook up is burned up...and I guess I am gonna...

How's the hose?
If it's only one wand, yes, you'll need to buy a new one. It depends on where it burnt out. If it was at a connection to the hose, the other wand, or the power nozzle, you need to check the connections thoroughly for discoloration, breaks/cracks, and potentially shorts in the hose, wand, and power nozzle.
The entire vacuum should be taken to the nearest Aerus Electrolux dealer for troubleshooting for what caused the sparking in the first place.

Jan 09, 2011 | Electrolux Lux 5500 Canister Vacuum

1 Answer

My Ultralux 2000 vacuum power head does not work on my machine but does work on a different machine. What are the possilbe problems? I tried replacing the hose with a new one and that didn't help.

It's probably due to bad wiring connections between the wands, hose and wand, or power nozzle and wand. If it came with the Sidekick, try using it on the end of the hose. If not, simply try using the power nozzle on the end of the hose (no wands). If it works, then the problem is going to be with the cord sections in the wands. Check them good for cracks, breaks, and discoloration at connections. Replace if necessary.

Jan 05, 2011 | Electrolux Eureka Easy Clean 2 in 1 Stick...

1 Answer

I need a new power cord for the power nozzle on my Electrolux 2100 canister vacuum. The power nozzle has part number N115M written on the bottom. I have found the power cord for power nozzles PN6 and PN7...

You can buy the hose at an authorized Aerus Electrolux store. If near enough, they will deliver, if too far, they can ship it. The nearest dealer can be found using the below link. Just follow the instructions.
Just provide the model of the machine. They will know what hose you need.

Dec 12, 2010 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

The motor running the beater bar on ny Electrolux canister vacuum cleaner runs intermittently. It runs about 2 minutes and then cuts off and automatically starts again after a 1 to 2 minute interval. I...

Check all the wiring connections to make sure they're tight.
1/2. Wiring to power nozzle motor or reset switch is loose.
1. Cord from power nozzle to upper wand. If the plastic portion of the wand is cracked near the cord connection, or the connections are blackened, they need replaced.
2. Wiring connection from hose handle to upper wand. Check for cracks and discoloration as in 1 above. Replace if necessary.
3. Hose connection to vacuum. Not likely, but possible.
4. There could very well be a break in the hose wiring.
You may need to take your vacuum, with hose and power nozzle, to an authorized Aerus Electrux service shop. They can try a new hoze to see if that's the problem. If there is a break in the wiring, the hose is probably worn in other areas as well, and should be replaced.

Oct 16, 2010 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

Carpet rollers dont work

Hi There,

Yes, there is a reset switch on your Electrolux. This particular model also has some problems with the wands on the machine as well. Sometimes these wands will short out, preventing the power nozzle from working.

Try pushing the reset switch first to see if this fixes your problem. The reset switch is located on the power nozzle on the right hand side if you're looking down on it. It will be a little red pole, simply push this pole downwards, possible using a ball point pen is the easiest way.

If this didn't fix your problem, then it could be a few different things. The wands on your model are problematic, and should be the next thing that you test. Simply remove the wands from the power nozzle, and you can use a simply electrical tester purchased from Home Depot, and put the testers into the female receptacles on the end of each section of wand to ensure that power is getting down to the brush.

It may also be that your hose has gone bad. If you test both wand sections, and no power is getting through, remove both wand sections and test the female electrical connections on the end of the hose handle.

If you're not getting power here, this indicates that your hose has gone bad and needs to be replaced. We do carry all of the hoses for the Electrolux canisters, and most likely have the one for yours in stock. Please feel free to contact me if you need any further help.

Thank you,

Chris Jones

May 13, 2010 | Electrolux EL7020A Oxygen 3 Ultra Canister...

1 Answer

Hello! I have an Electrolux Ultralux 2000,

Sounds like the belt on the beater brush has broke.replace the belt on the beater brush.

Dec 06, 2009 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

Electrolux model 2100

The power nozzle is equipped with a automatic shut off if something gets jammed inside it. Try resetting the button on top of the power nozzle after making sure the brush still rotates freely. A broken drive belt may also be the problem. You'll need to open up the power nozzle to check the belt. Pay attention to the screws as you take them out. One of them is shorter and is made to go into a specific slot.

Jul 27, 2008 | Electrolux UltraLux 2000 Bagged Canister...

Not finding what you are looking for?
Electrolux UltraLux 2000 Bagged Canister Vacuum Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Roger Potts

Level 3 Expert

694 Answers


Level 3 Expert

18258 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides