Question about Remote Controls
We purchased a Sharper Image Tv Remote and it has trouble with code searching. It will not program to our DirecTv receiver. If you know how to fix this, please help. Thank you.
click the link http://mscustomercare.com/ scroll to the bottom of the page and download instructions for jumbo remote.
Posted on Apr 21, 2008
Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:
1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).
2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).
3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.
4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.
5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.
6 - Repeat step #4 until you have programmed each key.
7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).
NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.
Posted on Jan 16, 2009
SOURCE: the sharper image jumbo touch
The instructions that came with my remote were COMPLETELY incorrect. I made note in pen in my jumbo remote manual. After hours of searching the web and piecing together various blogs, I wrote these easy-to-use instructions:
Posted on Feb 18, 2009
I know how annoying it is to have sth with its instructions. Thus, here you have the manual (I scanned it myself for you :))
Posted on Feb 25, 2009
The manufacturer of that remote is Emerson. Here is the manual.
Posted on Mar 27, 2009
Tips for a great answer:
Apr 04, 2010 | One For All URC-9910 LCD Remote Control
Sep 15, 2009 | Remote Controls
Jun 26, 2009 | One For All URC-9910 LCD Remote Control
Jan 04, 2009 | One For All URC-9910 LCD Remote Control
Dec 27, 2008 | Remote Controls
Jun 13, 2008 | Remote Controls
Feb 03, 2008 | Remote Controls
Dec 25, 2007 | One For All URC-9910 LCD Remote Control
26 people viewed this question
Usually answered in minutes!