Question about Casio QT-8000 Network Terminal

1 Answer

Casio QT-8000 POS

Ineed drives for the printer and cashdrawer

Posted by on

1 Answer

Re: Casio QT-8000 POS

What kind a printer are you using it now??
what kind a cash drawer are you using??

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My keyboard is not working and i can not install windows

It could be the PS2 port, some times if you plug or unplug a keyboard while the computer is on you risk blowing a couple of FUSISTORS they ar normaly soldered on the main board (they can be replaced by a good tech)

You could try using an other key board to make sure it is not defective, or use a USB keyboard if you suspect the PS2 port...

Have fun!

Dec 23, 2010 | Epson IM320 POS Terminal (1.2 GHz, 3.5...

1 Answer

Need 512 mb ram for my casio qt 8000. where can i buy ram? Thanks

There are many safe low discount places on the internet and local to most you can buy the ram you need. Its call DDR ram and you can purchase it online by clicking here from tiger direct.

Aug 17, 2010 | Casio QT-8000 Network Terminal

1 Answer

Keep having daily blue screen of death...

You should check whether the fan is working probably, this is probably due to overheating

Jan 18, 2010 | Posiflex JIVA 8000 Touch Terminal Network...

1 Answer

Wont power up. power pupply is good but the computer will not turn on.

Remove the battery and also reset the jumper and check you ram also clean the connector you can use pencil eraser to run and clean the ram.

Sep 15, 2009 | Casio QT-8000 Network Terminal

2 Answers

I need a owners manual

Click on this link to download documentation for your machine.
Let me know if this helps.
Please rate this solution.

Jun 30, 2009 | Posiflex JIVA 8000 Touch Terminal Network...

1 Answer

Posiflex Jiva 8000 Machine have lots of problems specially it does not have good ventilation and ofen power adapters and hardisk fails. I strongly recommend not to take this POS system and get into...

The problem with posiflex with fan models are started by the fans going bad which lead to overheating of the cpu and then spread to other components. Most of the time the power adapters and harddisk are actually ok, but the system will need some component level repair.

Mar 24, 2009 | Posiflex JIVA 8000 Touch Terminal Network...

1 Answer

I can not set up touch screen

Make sure you are using the right driver, posiflex use two different type of touchscreen, elo and fujitsu.

Mar 11, 2009 | Posiflex JIVA 8000 Touch Terminal Network...

1 Answer

Purchased used Jiva POS system

Jiva is just the manufactures name for the terminal they make. It has a microsoft operating system, usually xpPro. You can use any Restaurant POS software on it as long as it is compatable.

To get help with the software side you need to know what the name of the software is and contact them. Most software is propiertary to the previous customer and you will have to pay for a name change, support, reprogramming etc.

Contact a local POS reseller in your area, they might be able to help or leave some contact info and I will try to help


Feb 11, 2009 | Posiflex Jiva 5800 POS Workstation - P/N...

1 Answer

Unmountable Boot Volume

Hi windows xp wouldn't start up at all..(unmountable boot volume).kept restarting with the blue screen...I had ** xp disk (came pre-installed)....finally was able to get to my files by downloading K**ppix to a CD and running that on my broken xp ...just downloaded it, ran it, and I was able to access all my folder/files that I didn't want to loose...**w I can use my recovery disks to get my computer running again..I would recommend this option to anyone with ** xp saved me from loosing important files that I needed...just thought I would share this with you since I k**w many pc's do NOT come with the windows disk these days....

Mar 02, 2008 | Casio QT-8000 Network Terminal

1 Answer

Memory Upgrade

First, this is what I would do before buying more RAM. Turn off two terminals, take the memory from one to add to the other (no new chips please). I'll assume each machine has 128MB right now and I'll assume there are only two memory slots. If it boots up fine with 256MB, then I'd try to match the RAM exactly. Probably using PC1600 with/without a SPD module chip. Use CPU-Z to find out the memory details. ZT3000 Beta tester of "0"s and "1"s

Aug 23, 2007 | Casio QT-8000 Network Terminal

Not finding what you are looking for?

Open Questions:

See all Casio QT-8000 Network Terminal Questions

Casio QT-8000 Network Terminal Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Network Terminals Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers


Level 3 Expert

2598 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Casio Network Terminal Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides