Question about RCA 27F634T TV

1 Answer

RCA 27F634T Problem with my RCA tv - the set turns on w/ both remote and front panel buttons, as indicated by the red power light. however, there is no picture & no sound- just a black screen. i am unable to access any menu's, etc - as the screen stays black. also, the tv will not turn off - with remote or on front panel - i have to unplug set to get it off. i have replaced remote batteries, and used instructions to "unlock" front panel & retrieve child lock password - to no avail. any suggestions will be greratly appreciated.

Posted by on

  • 5 more comments 
  • Anonymous Jun 21, 2008

    Problem with my RCA tv - the set turns on w/ both remote and front
    panel buttons, as indicated by the red power light. however, there is
    no picture & no sound- just a black screen. i am unable to access
    any menu's, etc - as the screen stays black. also, the tv will not turn
    off - with remote or on front panel - i have to unplug set to get it
    off. i have replaced remote batteries, and used instructions to
    "unlock" front panel & retrieve child lock password - to no avail.
    any suggestions will be greratly appreciated. I am lenharlh@yahoo.com

  • lenharlh Jun 21, 2008

    Problem with my RCA tv - the set turns on w/ both remote and front
    panel buttons, as indicated by the red power light. however, there is
    no picture & no sound- just a black screen. i am unable to access
    any menu's, etc - as the screen stays black. also, the tv will not turn
    off - with remote or on front panel - i have to unplug set to get it
    off. i have replaced remote batteries, and used instructions to
    "unlock" front panel & retrieve child lock password - to no avail.
    any suggestions will be greratly appreciated.

  • Suze Q Jul 13, 2008

    I am having the same problem out of my RCA model 27F634T TV. We had a thunderstorm today when this problem began. Set will not respond in any fashion, either by buttons on the set or by the remote. Set will not even turn off; it must be plugged in/out to turn on/off. Just a black screen, no menu, no nothing except the red power light. When plugged in, the set does it's usual blinking of the power light, then the light stays red; but the set does not make it's usual "boing" noise then the light stops blinking like it used to. I read in the owners manual to try something with the parental control, but I can't even do that due to not being able to see the menu. I was wondering if this could have been caused by lightning, but I'm beginning to think this is just a problem with RCA's based on what I'm reading tonight.

  • Anonymous Jul 13, 2008

    I'm having the same exact problem with mine. I don't know a lot about tv's, but could it be a problem of the bulb burning out?

  • jimbo r Jul 13, 2008

    I'm having the same exact problem with mine. It doesn't appear to be a parental control or station programming as the screen doesn't even come on. Is it possible for the bulb to burn out?

  • ErinMarGos Sep 27, 2008

    I am having the exact same problem with my RCA 27F634T. While I was watching tv tonight it just turned off all by itself. I can turn it on manually or with the remote as indicated by the red power light but it is just a silent, black screen. Any suggestions would be welcome. Thanks!!

  • jrpena1 Nov 01, 2008

    I have the exact same problem, any news or someone who solve the problem

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Have you tried to access the menu features and tried to retune the stations on digital, or are you hooked up for analog.
If you don't know about what i speak, give me a yell. jr@excel.net I believe my remote sensor card is bad. While this might explain why you can't turn yours off, it would not explain the blank picture. If the menu does show, i would think the picture tube is O.K. if the menu does not show, there are some other things to look at.

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv will not power up



Press the TV button or ON/OFF button while remote is in TV mode and there's a source of power to the outlet or outlet strip.

Make sure the TV is plugged in.

You might have tried to turn on the TV during the lamp cool-down. Wait a few moments and the picture will appear.

Has the power light on the front of the TV been blinking for one minute? If so, the lamp may be dead. Refer to the Power indicator
is blinking or flashing section below for more information.

When you first plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 seconds
and then go off during the initialization of the TV. This happens only when the TV is unplugged and plugged back in. The TV can
only be turned on after the Power indicator goes off.

Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else, such as a lamp.

Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the
remote control solutions on page 53.

Multiple TV Setup might be set to the wrong option. Press MENU/OK on the front panel. Select Setup Options, then Advanced
Options, then Multiple TV Setup. Choose TV (default).

Sep 26, 2013 | RCA Scenium M50WH187 50" HDTV

1 Answer

My RCA 52" HDTV Rear Projection TV Model #MM52110JX1 will not turn on. Neither the remote, nor the front panel switch will turn on the TV. When you press the power button on the remote, the red indicator...


you must check the light indicator if how many times does it blink which tell the main problem or the error code of the tv. either the power supply doesn't work normally or the lamp need replacement.

Sep 23, 2013 | RCA D52W19 52" Rear Projection Television

2 Answers

The small black rca universal remote lost code book and need a code for a emerson tv


Hello
There are so may RCA model remote controls with black colour. If you send the model number of your RCA remote control I will try to send the codes for Emerson. Its model number will be either on its front or back cover, or inside the battery stop lid. Anyway I hereby give you some universal remote control codes for RCA with Emerson TV. Just try them.

011, 026, 027, 028, 029, 030, 031, 032, 037, 042, 053, 064, 065, 067, 075, 076, 079
Four digit universal remote codes for RCA are:
0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Jun 23, 2011 | Televison & Video

1 Answer

I need a remote control


Hello
Buy one PHILIPS CL 034 Universal Remote Control. RCA is listed it its codes.
Codes are:

0704 0002 0406 0007 0011

................. 0611 0811 0312 0514 0720

................. 0102 0502 0601 0817 0917

................. 0835 0901 0103 0803 0211
................. 0912 0114 0519 0320 0420

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.
Switch OFF and switch ON your TV WITH ITS FRONT PANEL POWER CONTROL SWITCH EACH TIME BEFORE TRYING AN OTHER CODE.
OK.

Feb 25, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

I can't get my universal remote programmed for my RCA tv model # F25648. Do you have any sugestions?


Hello

Three digit universal remote codes for RCA are:-
002 021 011 102 211 302 312 318 320 406 409 411 420 502 511
514 519 601 702 711 719 809 811 901 909 911 912 914
000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194
Four digit universal remote code for RCA are:-
0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
NB: Switch OFF and switch ON your TV with its front panel power control switch each time [NOT WITH REMOTE CONTROL HANDSET], before trying an other code.
OK.

Jan 06, 2011 | RCA F25648 25" TV

1 Answer

Ok, so I got a RCA remote from 1800-remotes for $40.00 that they said is guaranteed to work with the Proscan but do I need to reprogram the remote because it is not working.


Hello
Just try with these four digit codes. Proceedings are given below.

0031 0107 0015 0000 0162 0163


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
NOTE: Switch OFF and switch ON the tv with its front panel power control switch [NOT BY REMOTE CONTROL HANSET] before each try.

Dec 24, 2010 | Proscan PS32500 32" TV

1 Answer

Front panel locked by accident- no original remote, only universal, code unknown. tv has since been turned off by unplugging, now it won't turn on. remote has also been unprogrammed because batteries were...


Hello

Three digit universal remote code for RCA are:-

000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194

Four digit universal remote code for RCA are:-

0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Other ways to unlock RCA tvs
  1. Hold down MENU on the remote and VOLUME DOWN on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV its self at the same time for at least 4 seconds. The set won

Nov 22, 2010 | RCA 27R410T 27" TV

2 Answers

RCA 27F520T TV


Models: 24V511T, 24V510T, 27V512T, 27V513T, 27V520T, 27F520T, 27F50T, and 27F634T
TOPIC: Set comes on by itself
Symptom: When the set is first plugged in or after a power interruption the set comes on
Cause: Set was not taken out of factory mode, or has returned to factory mode
Cure: In the service menu go to setting FAC07, then change the value of OPTM2 to “00”
To enter the service mode simultaneously press “Volume Down” on the front panel and “Info” on
the remote control.
Use the original TV remote for the instrument.
Press “7” on the remote to enter factory menu 07. Use the channel down button to scroll down to
OPTM2, then use the volume buttons to set the value to 00. Press the “Sound” button on the
remote to exit the factory mode. DO NOT turn the set off until the screen displays “OK”.

Sep 12, 2007 | RCA TruFlat 27F520T 27" TV

Not finding what you are looking for?
RCA 27F634T TV Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...