Question about Philips PH-DVD5 Remote Control

1 Answer

Need Codes for a Philips universal remote

I need the codes and instructions on how to program my remote to a sony tv.

Posted by on

  • Tiffany C Dec 31, 2007

    It still wont work i dont know why the codes are not working.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You did not specify model but you can try this. Repost if you have a specific model #.
Direct Philips Magnavox Universal Remote Code Entry PM335
1. Press and hold the Code Search button until the red
indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV,
DVD, etc.).
The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL Up. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.

SONY .................. 202 708 801

Posted on Dec 29, 2007

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: in need of codes for philips universal remote CL034

Here is an alternate way of programing... 1) Manually turn on the device (TV, DVD) to be controlled. 2) Press and hold code search button until the red indicator stays on. Release the code search button. 3) Press and release the desired mode button (TV, DVD,etc) 4) Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes channel. 5) Press and release the Mute button to install the code.

Posted on Sep 27, 2007

SOURCE: Need the instructions and Code to Program universal remote control PHILIPS (Magnavox) and Magnavox TV.

how to get capation off my philips magnavox tv with remote can not make remote to go up or down . what buttons do i use help

Posted on Jun 13, 2008

  • 233 Answers

SOURCE: Lost the programming codes and instructions

Hello,

Here is a link to the page with the Users Manual for that remote control. It will have all codes and instructions in there.

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&sct=AV_REMOTE_CONTROLS_SU&cat=HOME_AUDIO_VIDEO_ACCESSORIES_CA&session=20090530030212_71.142.197.50&grp=HOME_ENTERTAINMENT_GR&ctn=US2-PH301S&ds=US2-PH301S&mid=Link_UserManuals&hlt=Link_UserManuals

Posted on May 30, 2009

  • 2 Answers

SOURCE: philips universal remote #cl035a need rca tv, dir tv sat codes

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/1500115_AD_EN.pdf
I hope that this link helps you!!!.. Your Welcome.. I had the same issue.. tried this and hey! it worked.

Posted on Aug 13, 2009

jhinsincity
  • 616 Answers

SOURCE: i need codes for my universal remote

INTERNET!!!

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony remote rm-42b


If your Sony remote is a universal remote control, you can use its code search function to find a code that will control your LG TV. The procedure is described in the instructions that came with the remote or you may be able to get instructions from Sony.

Apr 12, 2014 | Universal Remote Control Remote Control

1 Answer

Sony remote rmtb119a tv code for magnavox


I just keep trying different codes for for my Magnavox TV. Since they started at 01 for Sony TV's I just keep working up from there. For me it ended up being 22. Here are the complete instructions from sony's site:
Follow these steps to program the remote control to operate a television.
  1. Turn on the TV.
  2. On the remote control, press and hold the TV I/O button.
  3. While holding the TV I/O button, enter the manufacturer's code using the number buttons. 22
  4. NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  5. Release the TV I/O button.
  6. Point the remote control at the component.
  7. Press the TV I/O button to verify operation.

Feb 05, 2013 | Sony RMTD187A Remote Control

1 Answer

I'M INSTALLING A NEW REMOTE. IT CONTROLS THE SAT RECEIVER BUT NOT THE SONY TV. IT WILL NOT GIVE VOLUME CONTROL NOR TURN ON OR OFF THE TELEVISION. I'VE TRIED THE SONY CODES TO NO AVAIL. SUGGESTIONS?


rl_harris679

I have provided a link with instructions on how to program the new remote to your Sony TV. The link contains our different receivers. Select your receiver model, then a PDF document will open with the instructions for programming the remote to your TV. It begins with step 5. I hope this helps.

Programming the remote to TV:
http://www.dishnetwork.com/SupportSection/remote-setup

Sony TV codes: 500, 590, 000, 002, 073, 511, 514, 546, 550, 567, 578, 640, 670, 690, 758, 778

Ray Calo
DISH Network

Feb 19, 2011 | DISH Network IR Remote Control

2 Answers

NEED CODE FOR SETTING GE UNIVERSAL REMOTE FOR SONY TV


I HAVE A GE UNIVERSAL REMOTE AND I NEED THE CODE TO PROGRAM A SONY TV

May 10, 2009 | Universal Remote Control GE174Universal...

1 Answer

NEED CODES TO USE WITH ONE FOR ALL UNIV. REMOTE URC3300


Try holding down the tv power button and keep holding it while you press the channel button until your tv comes in.. It takes a few pushes. Make sure your tv is off first though.

May 09, 2009 | Televison & Video

1 Answer

Code to program JR-300 to TV


In the JR-300 manual, only code listed for Sony TV is 0000.

Here's the link to the codes:
http://www.remotecentral.com/features/r-jr300.htm

Apr 07, 2009 | Jensen JR300 Remote Control

1 Answer

Instructions and codes


it could be any of the following codes 067, 018, 016, 007, 049, 074, 076 here is a link for your remote controller with any code you need http://esupport.sony.com/perl/model-remote.pl?mdl=RMV302

Jan 29, 2009 | Sony RM-V302 Remote Control

1 Answer

RCA remote instructions for Sony Cable TV


1. Turn on the device you wish to program. 2. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
3. Press and release the device button for the device you are programming (TV, VCR or DBS•CABLE). The INDICATOR LIGHT will blink once then remain lit. DVD codes are programmed under the VCR button. Note: For AUX, press DVD•AUXthen the device button you are assigning to DVD•AUX. 4. Press and release ON•OFF until your device turns off. Important: You may have to press ON•OFF up to 200 times. 5. When your device turns off, press the ENTER button, the INDICATOR LIGHT will go off

Mar 27, 2008 | RCA Universal Remote Control

Not finding what you are looking for?
Philips PH-DVD5 Remote Control Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75888 Answers

matt martin
matt martin

Level 3 Expert

1241 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...