Question about Ovens

1 Answer

Hob broken I have a Beko dvc61 - 3 of the 4 hobs have just stopped working - strangely the front right one stills works, but the others don't. The warning lights also don't work... Nightmare! Thanks

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

It sounds like the wiring has broken down inside the cooker at the terminal block or a leg of power is missing if the cooker is supplied by three phase electricity. Then there may be a problem in your service panel. Is it a 3 segment circut breaker or 3 fuses in the panel?

Posted on Dec 29, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Gas hob will not light on my leisure gas hob

At the rear of the oven is a gas cut off valve. Try twiddling it

Nov 24, 2013 | Ovens

1 Answer

Hello, I have a DTI704 that has recently stopped working after some electrical work in my house. After turning on the induction hob, the only buttons that seem to work are for the Top Left and Bottom...

call the technician for a proper diagnosis amn quote
unless the electrician doing the wiring altered the circuit to the unit , there will no connect for the fault

May 24, 2017 | Ovens

1 Answer

Hi, 3 of the 4 oven hobs have failed to work on the 720ef. only 1 of them heats up now. when you turn the knob of the failed hobs only 1 out of the 3 makes the click noise but still doesnt heat up,...

Normally the 720ef is the oven, the hob is a separate unit and in my case is a STOVES 600G gas unit. Your unit may have a built on hob but the handbook for the 720ef does not detail this. In my case the hob ID is on the lower right hand side of the unit.
I think you will find that the elements may have failed but you will need to identify the hob to ensure correct replacements. Normally the element rating is on the base of the element. The handbook will tell you how to take the thing to pieces. It is possible that the hob element controls have failed but unlikely for all three or it may be a combination of both parts. I think you may have to contact an electrician to test everything to sort this out.

Mar 08, 2011 | Stoves 720EF Electric Double Oven

1 Answer

Beko dv555w electric cooker.Oven and clock are not working.The hob and grill are working.


check that the cook mode is set to MANUAL, as if its on AUTO it will not come on.

Dec 20, 2010 | Ovens

1 Answer

Hello. I have a new hotpoint CIO644 induction hob but when I turn a hob on, and put a pan of any size on the hob, it start ticking. The ticking stops when I take the pan off. The display shows the setting...


I'm not sure that you really have a problem as with induction hobs you need to put your pan (metal only) with the ingredients in it on the hob before switching the heater on.

it is the pan which will get hot, the ticking may or may not be the pan heating up.

Try it with water only in the pan and see if it works.

Dec 20, 2010 | Hotpoint Ovens

1 Answer

Our beko dv 555 w double oven bottom oven is not working as the clock display is not on

Beko DV 555w Electric cooker.Oven and clock is not working.
The hob and grill work.

Nov 19, 2010 | Ovens

1 Answer


The hob is normally totally independent of the oven. What is actually working or not working on the oven? i.e. does the grill still work, is the clock OK and can you set it, or is everything totally dead?

Oct 16, 2010 | Stoves 720EF Electric Double Oven

1 Answer

I have a Beko 'Leisure alta AL6ND' oven. The thermocouple has gone in the oven (ignites but not staying lit, all other burners and grill fine). I can get the back off easily, but the thermocouple screws in...

remove rear panels (3; 1 white, 2 galvanised).
look under rear folded edge of hob. remove 2 screws in corners. dont lose 2 top hat rubber washers. from rear of cooker, lift hob slightly and push forward 1/2". lift hob off. dont over tighten new thermocouple union on back of valve (note how tight old one was)

Dec 01, 2009 | Ovens

2 Answers

Beko D533 cooker only half working

where the power goes in there should be fuse links on both sides if they all in then its the thermal fuse inside

Dec 07, 2008 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers


Level 3 Expert

417 Answers


Level 3 Expert

77932 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides