Dz-mv550 problem when i have the dz-mv550a connected to my pc it says drive unaccesible. incorrect function can any one help

drivers can be found here:

http://dvdcam-pc.support.hitachi.ca/en/download/dl.asp

About halfway down the page look for "USB DZMV5.exe

Sorry we are not able to help you with your problem

you need to finalize the disc. With the recorded disc in, hit the "disc navigation" button and you will see a place to hit "finalize". Move cursor to "finalize" and then click "yes". You can only finalize a disc using the AC power source, it will not do it from your battery. You should then be able to play it on your dvd player.
Andy

Hello,
Please get the driver here : www.multi-cam.net/camera_downloads.html
www.nodevice.com/driver/category/Digital_Cameras.html
www.nodevice.com/driver/category/PC_Camera.html

Kind Regards, Jay__g465d

it wont eject i believe its jammed is this repairable?

Never mind, just ignored my posted note.
I just get confused . Had been tried to follow the instruction manual book, but the book doesn't mentioned max capacities of the SD memory card, so I called Hitachi Service Hotline, and they gave me helpful hints which is I should use max 1 GB SD memory card.
Thank you.

Regards,

irwannurhadi.

Go to the Hitachi website and you will be able to buy the accessories. I should think that you will be able to obtain your charger from there.

trying to get software..

I know I may be a couple weeks late however, I will still try to help. If you don't know at all how to do it then I would suggest reading the manual or PDF that came with the camera. The DVDCAM has a built in function that allows you to finalize a disk right in the menu options. If you knew that, and are pretty sure you are following directions, then I would suggest trying a different type of disk.( brand of disk) I've also heard of people having finalizing trouble with this camera due to a harware fault in the camera. That means you will have to get it replaced, hopefully under warrenty. Hope this gets you stated.

The answer depends on a lot of things. If you plug your cam in and it doesn't make that happy plug and play sound, then it could possibly be your usb port. If your PC recognizes that a USB periphial has been connected but does not install the drivers correctly, then you should make sure that you have the right cam drivers for your operating system. If that has went correctly then there's one more test to see if your pc has recognized the camera. Go to my computer look at all of the drive letters for one that is not there whenever the camera is unpluggedc. If a drive shows up when the cam is plugged in, then it recognized your cam, especially if you can navigate to folders within that are labeled DCIM or RTAV.