Question about Janome Memory Craft 10000

3 Answers

JANOME dIGITIZER 10000 - "JANOME.EXE has stopped working"

I am loading "Janome Full-Power Embroiodery software Digitizer 10000" on my wifes new PC and it is giving me the following error message "JANOME.EXE has stopped working". Could this have anything to do with the Vista operating platform" are there downloads to patch this or is it another problem?

thanks,

Jason

Posted by on

  • Anonymous Jan 25, 2008

    i have windows vista ,i cannot get my digitizer10000 to work,i get errow saying hasp driver not installed

  • Anonymous Apr 10, 2009

    I am trying to use my digitizer 10000 and it says hasp driver not installed.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Digitizer 10000 v2.21 might run in compatibility mode on Vista, but there's no gaurantees. Even the latest digitising suite Digitiser Pro/MB is experiencing problems running in Vista 32 and as yet has no real fix (driver) for Vista 64.

Posted on May 20, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My digitizer MB dose not reconize the dogle. Have never had a problem with the digitizer. Use on for years. Started with the digitizer 10000. It has worked fine till today. All it will do is blink. Can you help me? dmyers@dmcibb.net

Posted on Mar 30, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Try to download a upgrade for this program:

http://www.janome.co.jp/e1.htm

Posted on Feb 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does Janome have software available for a MacBook Pro and Memory Craft 10000 Digitizer?


No:

I just got an email this morning from Wilcom that suggested that they are working on something for a Mac. "Wilcom Elements 3" If another expense for new software isn't an option I would consider getting a secondary computer.... a PC.

If you can run PC at all... go to a pawn shop and buy one specifically for your embroidery machine. A couple years ago I got a 1 year old PC for my husband for $60 at a local pawn shop. I needed to clean out the former owner's personal pictures and tax info... but I was able to access and restore the factory settings and it runs like new.

Feb 26, 2013 | Sewing Machines

1 Answer

Why "Digitizer 10000", which used to work on my computer with WinXP SP2, is not working on Windows 7? After installing the software, I click on the button to start the program, but the mistake comes. Help...


Windows 7 is not compatible to your Digitizer 10000.
You may need a software driver to configure it with
the new operating system. You should know that there are lots of things that work with Windows XP and won't work with Win 7. So try surfing the internet
at Microsoft to address your problem.

Oct 14, 2009 | Janome Memory Craft 10000

1 Answer

Digitizer 2000 - Dongle ?


I'm going to assume that you mean the Digitizer 2000 software.

Unfortunately, your best bet will be to either wait and see if another copy (complete with dongle) shows up on eBay or upgrade to the Digitizer 10000 version (while Customizer 10000 is NOT compatible with the MC9000, Digitizer 10000 IS), either via your local dealer or snagging it on eBay.

Right now, there's two auctions on eBay for the Dig 10000. It seems to run roughly around $300-400.

Best of luck to you!

Mar 04, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Janomi Digitizer 10000


Well, after some research, contact with Janome Technical support and some trial and error, it seems that my problems are caused by a conflict with Windows XP Service Pack 3. At this time, my options are to run without service pack 3 loaded on my computer OR I'm told I can upgrade to Digitizer Pro and get rid of these issues. Neither is a good option in my opinion. Running without service pack 3 loaded for Windows, causes lots of system issues for me, but I hate to spend the $400ish it will cost me to upgrade too! I'm not even sure my computer has enough "horse power" to run the new version anyway. Just thought someone might like to know my experiences.

Feb 15, 2009 | Janome Memory Craft 10000

1 Answer

Looking for Dongle and Power Cord for Memory Craft Digitizer 2000


The only way to get a new dongle for your software is to purchase a new software package.

You can call Janome and ask them ... but I'm 99.9% sure that they'll tell you the same thing. :(

Feb 09, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Need Windows XP USB driver for Memory Craft 10001


contact me back at dbfm13@aol.com and i will send you all the drivers i have.
when i got mine working, i believe sometimes it is just by LUCK that things work.


Jan 12, 2009 | Janome Memory Craft 10000

1 Answer

MC 10000 Digitizer 10000 Error Message


Try downloading the updates for your software from Janome Global, downloads, software. Version 1 needs patches to make it compatible with XP. The most current Version for the 10000 software is 2.21, and the upgraded program is Digitiser pro/MB , a much more stable and far easier version to work with. The upgrade has to be purchased via a dealer or direct from Janome.

Apr 16, 2008 | Janome Memory Craft 10000

2 Answers

Donegal


This must be wrong. As long as you have the dongle, and its an original one. Janome should swap it for a new one. You might have to pay for the exchange but it should be aloot cheeper than buying a new.

If not, send me an email on tonje (at) tonje . no and I will give you a good price for a new Digitizer Pro v.2.0

Jan 08, 2008 | Janome Memory Craft 10000

Not finding what you are looking for?
Sewing Machines Logo

3,434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

194 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...