Software Lost I can not find the cd that contains the software for the scanner and built in card reader.  It comes with 2 discs and I have the second.  Unfortunately HP does not allow you to download the software from their site.  I have even tried calling them to order one and they say the cd they sell may not contain what I need.

The software CD would not help you unless you have a very old OS. Your best option is to invest ($10 - $15, sometimes less) in a CF card reader with a USB connector. If you have Windows XP or newer, or any version of Mac OS X, your computer will see the card reader (and your card) as a separate drive, and you will be able to download the pictures right off the card.

Skip the software and drivers. Get a card reader, save time. Download your pictures from the card reader to the hard drive of your computer. The card reader will be seen as a mass storage device in most all operating systems.
Since I have many different kinds of cameras I repair and check, there is no way I can use software and drivers for all the cameras. I use a card reader which has slots for all the different cards on the market.

Installing USB sound card (any windows)

1. Do not connect or plug the USB sound card
2. install the software and driver
3. restart the computer
4. connect the USB Sound Card
5. windows found new hardware
6. select find hardware automatically.
7. if windows cant find the driver select browse CD (contain driver)
   

i have 3 soundcard installed in my computer (XP Pro SP2,Vista Enterprise,Ubuntu Linux) 1 built in and 2 USB.

built in I use for speaker, 1 USB I used for monitor to my DJ mixing software, 1 USB I used for telephone(VOIP)

Hi

Here it is:


TravelScan 860
32-bit Windows 98SE/ME/2000/XP: TravelScan 860 V3.2.0.0 [345 KB]
Calibration Note:
To calibrate your scanner use the back of a plain clean white business card.

The camera is a standard serial and USB connect camera and what we Olympus recommends for XP users as well as their new software is to look into purchasing a smartmedia card reader that connects to USB port so that you are able to transfer images using the reader as opposed to connecting camera to PC. The camera connection is not truly XP compliant.

To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp Click on 'Free Download' to register your email address to receive an email containing a link to download either the Windows or Mac version. This software replaces all previous versions of Camedia Master 2.x, 4.x and Olympus Master 1.x and is XP compatible.

http://www.dynexproducts.com/t-drivers.aspx

Yes you can get your space back.
Let me clear you first you lost the space due to while system is writing data in your SD micro card it is suddenly ejected or disabled.

You will do this method to retrieve you data back. You will need some things
1. Card reader for SD micro memory.
2. A software called D M comes as Hard disk tool it comes in bootable cds.

You will remove your H D for safe side to protect your hard disk data.

Put your SD card in card reader and start you computer with bootable cd that contains D M software.

When your system is boot from cd run D M and go to option in D M erase all data. This will retrieve your all space from SD. Remember you can do the same thing with Hard disk if there is any bad sector or some space not avalible or disk partion is not able to delete by any softwares.

Hope this will help you, If you have any problem regards this you can reply to me other wise don't forget to make ansewer my thread.

Regards
nidostyle

Buy a flash card reader that plugs into your usb port. They are cheap and much better.

Hi Paul.

The card we got only works in swiper, and we need to sign and to carry an ID. You were right on this , just tested.


I do not use the lounge anymore, I think it is a shame, sorry for contacting here.


On printer, if it is not a software issue, it is usually a broken solder joint on reader print. I am sure you fixed this already.

software for 2800: go to fuji site for download. also, you can remove the memory card and insert into a reader avail for about $8.00. your computer should not need special software to read a memory card from a reader. if your computer has a usb 2 port, use a usb 2 reader to save time. mark