Question about One For All URC4220 Remote Control

1 Answer

Trying to programme an all in one remote

I have a remokid all in one remote, was bought from gadget shop a few years back,
have lost instructon manual for it,
cant find a manual anywhere online.
need to know how to programme it,
can anyone help

Posted by on

  • 1 more comment 
  • Anonymous Jan 02, 2008

    hi i have insignia dvd/vcr unit & i can not find a code # for it. i also need informatiom manual for am all in one remote urc-4220

  • magicaltime Nov 16, 2008

    i dont know how to program my electronics to my remote

  • Nicole Arnold Dec 10, 2008

    urc-4220 and need code for insignia dvd/vcr combo.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just found the answer after I posted as another user with this same problem. After much searching, I've found the code 0741. I've not testing all the functionality, but I can at least change the channel now. This is the One-For-All URC-4220 remote with Insignia dvd/vcr combo unit. Hope this helps!

Posted on Dec 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to load it


You should follow user's manual. If don't have one sould ask shop where you bought it.
Maybe you can download instructons for your unspecified staple gun form website of manuafacturer

Oct 19, 2015 | Tools & Hardware - Others

1 Answer

First the receiver red light was on constantly so i changed the batteries and now it's not lit at all?


Make sure the new batteries are installed properly.

If they are installed properly, then replace them AGAIN with new batteries. The new ones you put in may be faulty.

Do not assume that "new: batteries are good. Some Dipsh&t at the grocery store where you bought them may have dropped them on the floor six months ago, and broke the 'internals' (the "innerds").

Verify they work by installing them in another device, like the TV remote or such.

Clean the metal thingies where the batteries go in. Clean the ends of the batteries.

BANG THE REMOTE ON THE TABLE, and cuss at it.

Really. Gadgets (remote control units) sometimes respond to a bit 'o banging around, I am not kidding here. Cussing is optional.

Take the batteries out, push ALL the buttons a few times, and then replace the batteries again.

Good luck, have fun.

(Oh: and make sure the batteries in the RECIEVER are fresh, too!)

Yeah, there are likely batteries in the "other end" of the gadget, also.

Bang the remote on the table, and cuss at it a bit. It is much more rewarding when done in such fashion.

Trust me: this has been frustrating enough that you posted the question online. Get your "money's worth" out of the solution.

Good luck, and have fun!

Mar 06, 2015 | Ambient Technologies RCSTE Hand Held...

1 Answer

Why does power chair pull to one side


Any Pride Mobility dealer with a repair shop has a programmer gadget that can adjust the balance between the motors. Find your shop here:
Pride Mobility Products
If you can fix it with the gadget, it's cheap. Otherwise, actual repair can be expensive.

Jul 03, 2014 | Jet 3 Ultra Power Chair

1 Answer

User Manual: Remote Control DSE 8073


please go to www.fitness.manualsonline.com give your model, and makr.and proceed to download
God bless you

Jul 31, 2012 | Televison & Video

1 Answer

I have lost my manual for urc 7555. i have a tv which i have just bought and need to programme the remote to the tv. Any suggestions?


Please see the following solution from another FixYa expert (Hmerchant110):

http://www.fixya.com/support/t3644540-get_manual_remote

Hope that helps, and please give him a thumbs up if his information was useful to you.

Thanks.

Mar 21, 2011 | One For All URC-7555 Remote Control

1 Answer

Unit asking for code


Here is a link to the Owners Manual for Sony CDX-M610. Look on page 8 to reset after replacing the battery.
http://www.docs.sony.com/release/CDXM610.PDF

Oct 13, 2009 | Sony CDX-M610 CD Player

1 Answer

Programming my toshiba universal remote


http://www.tacp.toshiba.com/tacpassets-images/models/27AF45/docs/27AF45_om_E.pdf

Scroll down to the remote section page 12 -13 its in there... I have this same remote and just programmed it.. Good Luck to you!

Oct 12, 2008 | GE 84918 Remote Control

1 Answer

VCR Co-pilot video programmer


Fortunately I've found the instructions. However for anyone needing to know how to set the time of day - here goes - along the top above the display there are 3 tiny recessed buttons marked day, hour, min. Using a pencil or other pointed implement press these buttons to set.

Oct 05, 2008 | Televison & Video

1 Answer

Reprogramming keyless entry remote...


Believe it or not, the information and instructions for reprogramming your particular model of vehicle is provided in your owner's manual. The dealer does not need to be involved unless you have lost all your programmed and programmable keys.

Aug 19, 2008 | 1999 Ford Econoline

2 Answers

Remote Control Code


Most any lcd panel made in the last 2 years does not have generic codes available , you will have to invest in a learning remote if you want to have only one remote control.

Jun 10, 2008 | LG 42PX5D 42 in. Plasma HDTV

Not finding what you are looking for?
One For All URC4220 Remote Control Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75843 Answers

Cindy Wells

Level 3 Expert

5575 Answers

S. Gontko

Level 2 Expert

142 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...