Hi can you help!!, I have a phillips 37" lcd tv and want to use the HD mode with the xbox 360. I can get HD picture but no sound (this is using the standard leads and connecting the red & yellow). I did buy a VGA cable but i just a message on the screen saying video mode not supported - but i was able to use the pc mode but again no sound. please can you help.
when i put xbox on everything is fine.the display comes up,open tray,then i put game in it...
(More)
when i put xbox on everything is fine.the display comes up,open tray,then i put game in it says,reading, for 1-2 seconds and then seems to stop spinning and says open tray again.this is happening for all games.
my xbox 360 turns on with a green light and the drive opens and i hear the disc spin, but i get no...
(More)
my xbox 360 turns on with a green light and the drive opens and i hear the disc spin, but i get no video or audio output with HDMI or with the component cables
I need to know how/if i can open my NAT somehow without using a router, since i use internet sharing...
(More)
I need to know how/if i can open my NAT somehow without using a router, since i use internet sharing through my computer and for some reason it has a strict NAT suddenly.... im using my blackberry as a modem to my computer
Had 3 rings of death on xbox 360. took xbox apart, reapplied arctic silver to CPU and GPU, to no...
(More)
Had 3 rings of death on xbox 360. took xbox apart, reapplied arctic silver to CPU and GPU, to no avail. then replaced the xbrackets with better hardware to keep the heatsinks in contact with CPU/GPU. now, when the xbox boots it IMMEDIATELY shows 3 red lights, which flash 2 or 3 times, and then it turns to 2 red lights. the fans run very loud for 5 - 10 seconds, and shut off. it seems that the whole system shuts down, the heatsinks and CPU/GPU do not get warmer. running out of ideas here.....going to try shortly to use a different power brick. open to any and all ideas, please help!!!!