Question about Kyocera Finecam SL400R Digital Camera
My camera is ready to take picture but screen stays black. Please help!
SOURCE: Camera LCD - black pictures
When I take a picture, there will be know image. Black. I went into the "share" and the image is black. I kept my smart card and the other images are ok but the knew ones are black. Camera has power. I took the smart card off. Still the problem, black. Took the old images off and took some more shots. All black!! MMMMM?
Posted on Oct 31, 2008
SOURCE: battery life
I bought a few SL400R.. yes I think this is the best camera ever. The battery that came with the cameras always would last very short time, especially in cold weather. But when I ordered new ones online, these would last very long. The specs of the new batteries are the same as the original ones. Go figure. After that I ordered external charger too, so I dont need to use the camera's built-in charger. Works very well.
Posted on Mar 20, 2009
You may still be able to take pictures with your black screened Kodak camera. This problem occurs in the line of Kodak EasyShare digital camera models.
When you turn on your Kodak EasyShare digital camera, turn off the LiveView function. Take a picture using the small-windowed viewfinder (this is not the LCD screen). Also, try zooming in and out.
After taking a picture, review the picture to see if the picture has been taken. Then turn on LiveView and occasionally the LCD screen should no longer be showing a black screen.
Posted on May 14, 2009
SOURCE: my camera won't charge
I have the same battery charging problem to my SL400, after I bought the new battery and tried, the situation was the same, then I suspect the battery contacts becuase the camera can work fine with the charger plug in. After I press the battery end with some pressure, the charging light returns, then I checked the contact inside the camera, I found no dirty on contacts but they all flat, it means the battery contacts are losen contact with the camera charging contact. After I carefully tilt each contact upwards a bit (about 2 mm) then let the contact returns to normal, it works. but I don't know how long I need this repeat job and has to be careful not too break the contact, I think the contact tension is getting old.
Posted on Jan 18, 2010
Tips for a great answer:
Jan 08, 2015 | Kyocera Finecam SL400R Digital Camera
Dec 26, 2009 | Kyocera Finecam M410R Digital Camera
Oct 31, 2009 | Kyocera Finecam S3R Digital Camera
Apr 02, 2008 | Digital Cameras
Jan 23, 2008 | Kyocera Finecam SL400R Digital Camera
Nov 24, 2007 | Kyocera Finecam S5R Digital Camera
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: