Question about Philips Magnavox MWR10D6 DVD Recorder

1 Answer

Hook up need info to connect 52 inch rca to magnavox mwr10d dvd to record from directv

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 44 Answers

Connect yellow white and red cables FROM AUDIO/VIDEO out from the dvd player to the tv. connect your cable wire or coaxial cable to this unit. (the first one is going to be on your tv disconnect that one and put it on this unit where it says ANT IN.) connect the cable that came with it on ANT OUT or a cable that you might have and then turn on tv. and use your original remote to your television and look for a button that is regarding input or tv/video or tv/av. This function will only be on your tv remote. NOT DIRECT TV.

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 39 inch Emerson hdmi led tv and it is hooked up to Directv. I'm trying to hook up my daughters DVD player it is a Sv 2000 DVD CD player e everything is hooked up we get sound no picture.


hi try using RCA cables to make sure youre connections r not the problem..plug the rca cables n the output of dvd then into tv input & set tv input to AV .good luck
25847538-sbvxvnx04sjjctygsempvdda-3-0.jpg

Sep 02, 2015 | Emerson Televison & Video

1 Answer

My TV is a Sharp-AQUOS Model # LC52D64U, I have 2 DVD players. SONY DVD player Model #DVP-S530D and MAGNAVOX VIDEO CASSETTE RECORDER/DVD PLAYER MODEL#MWD2206. Thanks Barbara


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LC42_46_52D64U.pdf




SONY DVD PLAYER - MODEL # DVP-S530D:

http://www.docs.sony.com/reflib/docget.asp?manualid=8499&template_id=1&region_id=1&DL
=




MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:


http://download.m4c.magnavox.com/files/c/cmwd2206_f7/cmwd2206_f7_dfu_aen.pdf




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.


You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.




DIRECTV CONNECTION TO TV


Make sure your TV and DirecTV receiver are turned off before making any cable connections.
Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.
Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.
Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.
See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.


Here also is a link to a short video which demonstrates this basic HDMI connection procedure:

http://www.youtube.com/watch?v=J7P-yayRJ6c&NR=1




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.
In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.
At this point you should be getting an input signal from the DirecTV Receiver on your TV.
That completes the DIRECTV to TV connection portion of the system hook-up procedure.



SONY DVD PLAYER CONNECTION TO TV


Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.
Here is a link to a picture of an S-Video cable in case you need to see one:


http://amazingbestsellerstore.tk/wp-content/uploads/2011/08/31nOF2e5DXL.jpg





And here is a link to a picture of a set of 3 color RCA cables:


http://www.cameratron.co.za/images/productcables/cables/rca%20to%20rca.jpg




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.
See page 8 of the SONY DVD Player manual.
Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.
Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.
Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.
In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.
At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.
This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.


MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION

I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.
COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.
Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.
YELLOW cable plugs into the VIDEO OUT connector.
RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.
See page 7 of the MAGNAVOX manual, METHOD 1.
Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.
YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.
RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.

In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.
Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.
At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.
This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.
Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.

This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.


Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Oct 05, 2011 | Sharp Aquos LC-30HV4U 30 in. LCD HDTV

1 Answer

What's your problem?NO MANUAL FOR 52" sHARP


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForH...




SONY DVD PLAYER - MODEL # DVP-S530D:



http://www.docs.sony.com/reflib/docget.a...





MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:



http://download.m4c.magnavox.com/files/c...




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.



You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.





DIRECTV CONNECTION TO TV



Make sure your TV and DirecTV receiver are turned off before making any cable connections.

Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.

Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.

Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.

See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.



Here also is a link to a short video which demonstrates this basic HDMI connection procedure:


http://www.youtube.com/watch?v=J7P-yayRJ...




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.

In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.

At this point you should be getting an input signal from the DirecTV Receiver on your TV.

That completes the DIRECTV to TV connection portion of the system hook-up procedure.




SONY DVD PLAYER CONNECTION TO TV



Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.

Here is a link to a picture of an S-Video cable in case you need to see one:



http://amazingbestsellerstore.tk/wp-cont...





And here is a link to a picture of a set of 3 color RCA cables:



http://www.cameratron.co.za/images/produ...




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.

See page 8 of the SONY DVD Player manual.

Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.

Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.

Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.

In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.

At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.

This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.



MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION



I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.

COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.

Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.

YELLOW cable plugs into the VIDEO OUT connector.

RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.

See page 7 of the MAGNAVOX manual, METHOD 1.

Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.

YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.

RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.


In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.

Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.

At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.

This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.

Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.


This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.



Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.


I hope that was helpful to you, good luck and take care.


Joe.

Oct 04, 2011 | Televison & Video

1 Answer

Have magnavox dvd recorder record direcTV DVR programs w/ hdtv


I am unfamiliar with this unit.
If you have scart connecters on both, connect av2 on the tv to av in on the recorder. set the recorder to record from av source.
You should now record a program, I think the static is the fact that composite is out from the dvd only, not an input, and in on the tv, not an output.

Sep 04, 2009 | Philips Magnavox MWR10D6 DVD Recorder

1 Answer

There has got to be a way


I have this model..was trying to hook it up to a directv hughes receiver. After a day of trying and many curse words I found that using this hookup works . Hook up your satellite connection to you tv as usual...Now plug rca cables(red, yellow white) into the corresponding holes on the BACK of the Directv receiver ..now plug the rca cables into the FRONT of the Magnavox player...you will only use find holes for the white and yellow(that's ok) Now hook up up the dvd player to the tv using the rca connection back of dvd/vcr player..or if your tv only has a coax connection you will need a rf modulator available at walmart etc. You will run the dvd/vcr on L2. The key is the connections to the FRONT of the dvd/vcr player..I hope this helps..:)

Aug 03, 2009 | Philips Magnavox DVD/VCR Dual Player

3 Answers

Magnavox dv220mw9 does not have a ant. in,or ant. out. How do I hook up to my direct tv satellite rcvr. My original hook up is from a DTV d10-300 RCVR to a Sylvania vcr/dvd SR2900,which has a antenna in...


have this model..was trying to hook it up to a directv hughes receiver.After a day of trying and many curse words I found that using thishookup works . Hook up your satellite connection to you tv asusual...Now plug rca cables(red,yellow white) into the corresponding holes on the BACK of the Directvreceiver ..now plug the rca cables into the FRONT of the Magnavoxplayer...you will only use find holes for the white and yellow(that'sok) Now hook up up the dvd player2.gifto the tv using the rca connection back of dvd/vcr player..or if yourtv only has a coax connection you will need a rf modulator available atwalmart etc. You will run the dvd/vcr on L2. The key is the connectionsto the FRONT of the dvd/vcr player..I hope this helps..:)

Jun 04, 2009 | Philips Magnavox DVD/VCR Dual Player

2 Answers

Help hooking a dvd player to a tv


  • have you try to hook the rca jacks to the tv they should be color coded red, white, yellow, yellow is the video, red and white is audio. same as hooking to tv box.

Mar 24, 2009 | Panasonic DMR-E30 DVD Recorder

1 Answer

I need codes for my direct tv box and rca tv .vcr/dvd combo


MAGNAVOX ................................ 0247

DIRECTV .......... 0863 0864 0564 0763
................. 0963 0259 0260 0263 0962
....... 0664 0065 0265 0465 0765 0866
....... 0966 0367 0567 0362 0563 0765

Dec 27, 2008 | Philips PM3S Remote Control

1 Answer

Hook up dvd


Found this on http://www.satelliteguys.us/directv-forum/118015-hooking-up-dvd-player.html,

The Directv box should have at least two sets of out puts. You did not say what receiver you have and if the dvd is a player only of a recorder so its hard to say how to connect it.

If you have a dvd player only then take the output from the dvd player and connect it to you tv's second input, HDMI or component or what ever is a match between the two unites.

If you have a DVD-Recorder that you want to record programs from the directv receiver then take the second output from the receiver and connect it to the input on the DVD-Recorder and connect the output as above.

Hope this helps.

Sep 19, 2008 | Memorex MVD2042 DVD Player

1 Answer

Magnavox MWR10D6 can't record from camcorder wrong channel


OK...try this...plug your RCA cables from your camcorder into the RCA input jacks on the back of the recorder. If you have a VCR, it can be plugged into the coax input on the back of the recorder. Use the coax output and plug it into a RF modulator (about $20 at Wal Mart). Plug the RCA output cables from the recorder into the RF modulator as well (Don't ask me why, but it seems to work on mine). Connect a coax cable from the RF modulator to the TV. Make sure the TV and Recorder are both on the right channel. The RF modulator will have a channel switch to use channel 3 or 4 on the TV. Make sure the recorder is set to E1 (Rear). You can check this with the channel +/- buttons on the bottom right of the remote. Good luck.

Jan 06, 2008 | Philips Magnavox MWR10D6 DVD Recorder

Not finding what you are looking for?
Philips Magnavox MWR10D6 DVD Recorder Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...