Question about Linksys Wireless Ap + 4 Port Router (befw11s4-eu)

1 Answer

Lookin 4 parts

Need a 5vdc 2.5a power adapter do u know where i can find one

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that gotĀ 5 achievements.


    An expert who has achieved Level 3.


    An expert that hasĀ over 500 points.

  • Master
  • 482 Answers
Re: lookin 4 parts

Ebay Item number: 280186438699

Posted on Dec 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I need a power adapter for the midland WR100 radio

Aug 27, 2013 | Routers

1 Answer

I need to know which power adapter to use in connecting my Belkin Wireless Pre-N router Part # F5D8230-4. Somehow my son mixed the adapter in with a box of others that were ready to be recycled. Is there...

look on the router on the bottom or at the power jack. The voltage and amperage level will be there. Then match it to the power supply that fits and has the same voltage/amp output.

Nov 17, 2010 | Belkin Wireless Pre-N (F5D8230-4) Router...

1 Answer

Need to buy a replacement power adapter for this model, can you tell me what the dc output and connector size is - Zyxel P660HW-D1

Dc output is 12v and 1amp.
You can buy power adapter for Zyxel P660HW-D1 from nearest computer shop or from internet.
It's power adapter needs 12v and 1 amp.
Let me know if you need further assistance.Thanks for using FixYa.

Jun 13, 2010 | Zyxel P660HW-D1 Router

1 Answer

Power switch on off Acer 5720

If the plastic cover is broken or gone, you can order the part (bezel) from Acer. If the power button 'clicks' but the laptop won't power on then you probably need a new mainboard. If no power, try with another a/c adapter first.

Hope this helps!....let me know what happens.

Dec 12, 2009 | Routers

3 Answers

I need to purchase a power supply cord for 2wire 2701HG-B Wireless Modem?

This are the specs you are looking for:

Input Voltage: 100-240VAC (50-60Hz)
Output Voltage: 5.1 Volts DC (not more!)
Amperage: 2.5 Amps (not less!)

I saw an adapter online for about 10$. Look here.

Apparently you are not the only one experiencing problems with the power supply. See here.
Someone found a replacement:
"...I have noticed that the power supply/charger for the Sony PSP has an output of 5VDC/2A center minus (neg) plug, and the plug fits perfectly in the 2wire gateway. I bought one out of sheer desperation at the local game store and it only cost me $15."
Not bad!

Good luck!

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Jul 14, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Power adapter

I am not affiliated with them but have had good experiences with All Electronics in Van Nuys, CA (inexpensive) - google 'em!

Apr 07, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Need new power adapter

you should be able to buy a universal power adapter from Radio Shack that will most likely have 4 or 5 different connection tips and will be able to change the voltage to different voltages.

Good Luck

Jan 07, 2009 | NetGear WGR614 Wireless Router

27 Answers

2wire 2701HG-B power light red

A sony psp power supply has the same specs and is a lot cheaper than R/Shack Got mine on E-Bay for under 4.00!!!!!!!!!!!! with FREE shippiong

Jan 02, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

No power led, wlan led blinking

well, what you could try is unplugging the power source from the cable modem, and the router. wait about 1 minute. then plug everything back in and wait.

i remember having this problem as well, but i think the problem with me was that my wireless computer was too far away from the wireless router, not saying that your too far or not, but that what i had, so i just pitched the wireless adapter, and created an ethernet connection. just sharing my experience.

Feb 26, 2008 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Power problem

Hi, You would need a VOM (voltmeter) to check that the power adapter of your is giving out the necessary DC voltage to the router from the power plug. If yes and you have ruled out that it is not the power adapter nor the AC mains where it is plugged, try again but do a hard reset. If still a no go, it may be that your router developed a problem in its internal voltage regulation circuitry. Normally inside would be a fuse, a reverse protection diode and a 3 terminal voltage regulator whose output is 5VDC with some capacitors. You should check each that component is ok and proceed to check whatever you can inside the router. If 5VDC can be detected but there are no indicator lights, it may be that the chipset is fried. If this is the case, it may be to your advantage to replace the entire unit rather than do a component level repair. Pls be reminded of safety precautions when working with powered electronic devices. This type of problem is caused by a strong power surge or near lightning strike. If you are not comfortable opening the unit, perhaps you should seek the services of a qualified professional. Hope this be of some idea/help. Post back how things turned up or should you need additional information. Good luck and kind regards.

Oct 05, 2007 | SMC Barricade Turbo Router

Not finding what you are looking for?
Linksys Wireless Ap + 4 Port Router (befw11s4-eu) Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts


Level 3 Expert

18259 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides