Question about Canon PIXMA MP130 All-In-One InkJet Printer

1 Answer

Doesn't print Pixma MP130 goes through the motions of printing but page comes out blank. Any help would be appreciated.

Posted by on

  • jimbo-jim Mar 08, 2008

    My printer is going through the process, however the page comes out blank. I have replace ink tanks and still blank pages. I have preformed nozzle checks, deep cleaning, roller cleanings and all else as suggested in maintenance.



    Thanks

  • jimbo-jim May 11, 2010

    After checking for cartridges and printer heads still printing blank pages.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 69 Answers

Open the printer and make sure the cartridges or printer head does not have any packing tape or anything like that covering the ink jets. If that is not it, try reinstalling the printer drivers and printing a test page.

Posted on Dec 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing blank page


Open the top and make sure the carrier is not stuck to one side and also check that the drive belt is on.

Jan 27, 2014 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Replaced ink cartridges, printer goes through all the motions, but paper comes out blank. I have done all the maintenance steps. What gives?


Cannon ink cartridges go into a print head. This is normally a removable box the ink cartridge sits in.

First remove the head and the cartridges from it. Now try this to clean the old ink off the print head, rub/soak the print head in alcohol. Make sure the print head is complete dry and place the ink back in it and return to the printer. Try to print a page, if you have the same results you need to replace the print head.

Jul 21, 2011 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

After cleaning/maintenance, pages are still blank.


If you have just bought new carts (ink) and installed them into the printer and there is blank pages. and the printer is acting like its printing (moving from left to right) and sending paper out then i would say 99.9% it is defintally the head. On the printers that have the head built in and you insert your carts (ink) into the head and you don't print but very so often this is a common problem with ink printers the head gets clogged. If you are attached to your pinter you can take it to a print shop and have them clean the head (they have to remove it from the printer)
When buy a printer if you dont print alot i always suggust to get a printer where the head is built into the cart (ink) like hp they are more expensive to repalce the ink but you get a new head every time :)
Hope this helps
Steven.

Apr 21, 2010 | Canon PIXMA MP130 All-In-One InkJet...

2 Answers

Printing gives only blank pages...


Maybe you need performance a preventive maintenance if you know how great, if not you can call a Printer tech in your area.

May 27, 2009 | Canon PIXMA MP750 All-In-One InkJet...

1 Answer

Canon PIXMA MP130 printing blank pages & cartridge jammed message


Hi You can Try

Error Code 5100 Yes see lots of this errors
Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.


All The Best: Pineworks

Mar 11, 2009 | Canon PIXMA MP130 All-In-One InkJet...

2 Answers

Prints blank pages


the reason is nothing but ur printer's ink catridges are empty.pls refill or buy new catridges..

Jan 24, 2009 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

My printer go thru the motions of printing a doc but comes out blank,( it will print internet stuff)


tried to check printing connecting at another computer (not networking)? icq 475653626

Sep 26, 2006 | Canon BJC S300 InkJet Printer

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2188 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...