Question about Computers & Internet

2 Answers

L222WT flatron 21.6 monitor is not working

When the monitor is turned on, the LG symbol/logo appears as if it will then go to the Windows Vista page. Instead, "digital power saving mode" appears. The blue "on" light turns to orange.


Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Power saving is the default the monitor goes into if it doesn't get the correct signal down the cable wires of the computer. There might be three culprits:  (1) the cable between computer and display (most likely), (2) the display itself (unlikely since you see the LG logo) and (3) the graphics card inside your computer.  #1&2 are easy to check by swapping with a friend for troubleshooting. #3 is tricker and more expensive and might require a savvy friend or a computer repair service (between $60 and $100/hour for labor) plus between $40 and $80 on Amazon.com for a new card depending on whether you need a analog or digital one. Don't waste money on super costly cards unless you use your computer for gaming.

Posted on Dec 28, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

Hi there, you have a problem to your monitor, you don't have a signal going to the monitor, means that you have a problem at the video section. it also a horizontal problem. try to check each section and troubleshoot. ty

Posted on Dec 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg logo appears then goes in to power saving mode LG Flatron Wide Monitor


Hello davidhague99 ,
Check your VGA cable if connected properly to your CPU or Video Accelerator Card,if connected properly,try another VGA cable and if the problem persist you need to try another source.
hope it helps thanks

Jun 11, 2011 | LG FLATRON L1919S-SF 19 inch LCD Monitor

1 Answer

When I turn off the computer or restart the computer or put it in a sleep mode, my LCD monitor LG Flatron W2234S always turns black but the LED stays blue instead of yellow and the monitor does not react...


Try changing the Resolution for the lowest one, if it works it will see the letters and everything very big. I have same trouble, specially since I change the original Vista Starter for the new Windows 7, I have not found a free controler that helps me and I have seen many people with same the problem. Sorry for my english.

Dec 11, 2010 | LG 22" FLATRON LCD Monitor

2 Answers

LG Flatron L177WSB-how would I use my newly purchased unit after switching it on, LG logo appears followed by the Power Saving Mode it all goes black on the screen.


Hi, the Power Saving Mode, turns the screen off to conserve energy. On the remote, press Menu, and scan to Power Saving Mode. You can change the amount of time, when the Screen turn-off, the TV shut-off etc. You can set the time to (5 min) to, (never, turn-off). This should help with your problem. Thanks paul7of9

Jan 14, 2010 | LG Flatron L1750S 17" LCD Monitor

1 Answer

LG Flatron - Power button flashing blue


i get a similar thing, i accidently entered sleep mode then turned off my computer at the power button on the back, now i turn on my monitor( i dont get blue flasjhing but it jsut goes on and it doesnt register, then says going into power saving mode and the colour on the button turns yellow its very frustrating :(

Apr 20, 2009 | Computers & Internet

1 Answer

Screen is now a weird color


The problem might be in the cable. Try to reconnect it to your machine. Also try to set your color settings on the monitor itself, so that all the colors are equal.

Sep 26, 2008 | LG Flatron L1750S 17" LCD Monitor

1 Answer

LG Flatron L222WT


check the memory IC, Horizontal-vertical IC then check the processor voltage are the stable & is it support the refresh rate. at last check the EHT transformer, may be your processor controlled through it or it loses the flyback voltage .

Jan 27, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...