- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A E244 error code deals with the scaner. When you turn the copier ON will the scanning lamp turn ON? If it dose and you make a copy and thhe scaner moves & start to make a copy and then codes out. The problem is the BLACK scaner power cable has a crack in the coatting and is arching out to the frame o the copier..... It is not a easy fix.... If the scaner lamp is not turning ON???? You may have a blown Lamp or thermal fuse.... You can still find these parts..... The code will not go away till the problem is fixed.. Good Luck
start - program- lixmark scaner- click on it-the diloge window for scaner apper choice the dip as300 or more put 300 is good then choice the jpg for hoto to be very easy when you have save the photo make prevew for the picture the scaner will make scanning for the picture in the glass then will apper on you moniter computer select the part you want scanning by mouse then click scan when finish save it .make sure you instull the scaner in your computer good.
KIMA7 and GUEST:
You have to service the scaner craddle if U want to, or replace it with a new part.
The noise is because the scaner cannot align. Under the front panel - under the glass is a white strip that should be read by the scaner in order to calibrate (find the right limit).
If there is some dust on the craddle mirrors or if the CCD sensor is fault, then the craddle wants to go beyond the right limit of the chasis - then the noise apears.
The mirrors and the lens should be cleaned, then if this noise is still there, you should replace the craddle.
In Romania there is no service part available for this printer, there is only the Unit Exchange solution. Very expensive.
Lillouie - If U have reinstalled the AIO with a new driver, you should have a list of scaners that you can select. 2 mabye.
Try from a Word doc to insert picture from scaner/camera and U'll see that there are more than one scaner in that scrolling list.
If this isn't so. Uninstall the hole printing solution from HP, then install it from clean..