Colors are seperated and arched

The WS-65809 uses two of the STK-392-570 convergence IC's---if convergence is skewed and will not adjust----both chips and any of the protect resistors around them that are bad need to be replaced.

The repair involves getting the middle circuit board out of the set---You can buy a pair of the chips on Ebay for less than 14 dollars plus shipping.

This all depends on if you are handy and know how to solder----each chip has about 18 pins that are soldered in-----I repaired one of these here yesterday for someone---repair takes about one hour.

If you are able to do it yourself you will save a lot of money as most shops charge 300-400 for this type of repair. If you get someone to do it for you make sure they change BOTH chips---

I have had so many people here ask me how do this repair that I have composed start to finish step by step instructions for this set---they tell you everything you will need to do the repair---if you decide you want the instructions let me know and I will post them here for you.

Not everyone can do the repair---

IF YOU HAVE ANY QUESTIONS OR NEED ADVICE LET ME KNOW----I am here to help people.

SD TECH