- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have just bought new carts (ink) and installed them into the printer and there is blank pages. and the printer is acting like its printing (moving from left to right) and sending paper out then i would say 99.9% it is defintally the head. On the printers that have the head built in and you insert your carts (ink) into the head and you don't print but very so often this is a common problem with ink printers the head gets clogged. If you are attached to your pinter you can take it to a print shop and have them clean the head (they have to remove it from the printer)
When buy a printer if you dont print alot i always suggust to get a printer where the head is built into the cart (ink) like hp they are more expensive to repalce the ink but you get a new head every time :)
Hope this helps
your print head is either clogged or damaged, A print head is the unit your ink cartriges sit in. If its a nedw or newer printer (under warranty) you can contact the manufacturer and they will send you a new print head at little to no cost-good luck
Confirm that the ink tanks are installed properly
replacing the ink tanks, confirm that the new ink tanks are installed
properly. If the ink tanks are not locked into place, paper may not be
fed properly, or ink may not be supplied to the print head.
Check that the printer is powered on and open the front cover.
Wait until the print head moves to the center.
Check if the ink tanks are installed properly.
Ink tanks installed correctly
Ink tanks installed incorrectly
When installing the ink tanks, push the top of the ink tank until a click sound is made.
Note: If the ink tanks are not installed properly, paper may not be fed properly, or ink may not be ejected.