Question about Magellan eXplorist 500 GPS Receiver

1 Answer

Explorist 500 Whwn I turn on gps I get the message press enter to configure to nand

Posted by on

  • cidlunger Feb 15, 2008

    I have the same problem. The screen reads "Press ENTER to configure NAND...Press ESC to cancel". When I press either one of those buttons the unit shuts off.

  • cidlunger Feb 17, 2008

    pippokid: You've given me some hope, but when I'm in file transfer mode and click on the background maps folder, there's nothing in it. I must tell you I am new to handheld gps, I just received this unit and know very little about the operation.


×

Ad

1 Answer

pippokid
  • Level 1:

    An expert who has achieved level 1.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.
    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Press nav + power; then change the numbers 00 in 95 by using the joystick and and then press the joystick itself; accept what proposed.
after turning the gps on again and pressing enter the NAND will be configured and your gps will become in order again. if necessary, in usb file transfer mode, reload the basemap in the directory background maps

Posted on Feb 16, 2008

  • pippokid
    pippokid Feb 17, 2008

    clean completely the memory with the secret command 95 as I wrote, then turn the 500 on and press the joystick when it asks you to "press enter to configure NAND". it should configure in two seconds and it should start regularly. it happened so to me in more than one occasion. no file transfer mode

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi Guys: On turning on my explorist 400 a message appears. UNIT CURRENTLEY CONTAINS NO MAPS! INITIATING MAP UPLOAD This message wont go away, and all buttons refuse to work. The only way I can turn it off...
Jeff, I had the same problem with my explorist 500. Your unit lost the "BASEMAP.MGI " file. You will need to get a copy of that file. Then install it.
Try this site http://imhz.com/2006/05/my-explorist-is-screwed.html
(I would recomend all explorist GPS owners copy and save that file and store it in a safe place. I have mine on a thumb drive).

Dec 05, 2009 | Magellan eXplorist 400 GPS Receiver

2 Answers

Magellan Explorist 500
The necessary map software is not installed - did you buy the unit with software?

Mar 19, 2008 | Magellan eXplorist 500 GPS Receiver

2 Answers

My eXplorist XL is locked up
Error message at start-up reads: "Press ENTER to continue NAND, Press ESC to cancel". Either choice I seclect and the unit shuts-down.
"With you XL turned off press nav + power; then change the numbers in the box from 00 to 95 by using the joystick and then press the joystick itself; (ENTER), accepting what is proposed...

Either FORMAT or SCAN... LET IT RUN!

After turning the gps on again and pressing enter the NAND will be configured and your gps will become in order again. Your system will immediately start to re-set itself.

If necessary, in usb file transfer mode, reload the basemap in the directory background maps..."

The only difference is that I had to load my SD card in the unit for it to work during the FORMAT.

My unit is NOW re-booting back to normal!

Sep 02, 2008 | Magellan eXplorist XL GPS Receiver

2 Answers

Help Explorist 500 jammed (locked up) wont even turn off
To speed things up a bit with frozen Explorists, you can undo the battery cover and pull out the battery then replace and start again. I have had to do this many times.

Jun 10, 2008 | Magellan eXplorist 500 GPS Receiver

1 Answer

NMEA communication does not work ( but file transfer is OK)
Try rebooting windows, with gps off connect the cable to gps.

Go out side get a good gps signals on nav menu.

Set the gps communications menu to , nmea, 2.1

Plug the device into a good usb port.

If you look under modems, in control panel you should see a new modem called explorist xxx

If you look at the properties for that you can see its com port number.

I just tried this program http://www.visualgps.net/VisualGPS/

and it views nmea from the explorist, just set the com port to the one in the explorist modem .






Jun 06, 2008 | Magellan eXplorist 500 GPS Receiver

5 Answers

Error Message? "Press ENTER to configue NAND Press ESC to cancel"
With you 500 turned off press nav + power; then change the numbers 00 in 95 by using the joystick and and then press the joystick itself; accept what proposed.
after turning the gps on again and pressing enter the NAND will be configured and your gps will become in order again. if necessary, in usb file transfer mode, reload the basemap in the directory background maps

May 24, 2008 | Magellan eXplorist 500 GPS Receiver

1 Answer

Configure NAND on Start up
I finally wound up deleating the base map useing the Maintenance codes, which has now left me with another problem and that How do you rload the basemaps from Mapsend Lite?

Stewart

Mar 16, 2008 | Magellan eXplorist 500 GPS Receiver

1 Answer

Doesn't opperate
I have the same problem.

Jan 06, 2008 | Magellan eXplorist 400 GPS Receiver

1 Answer

Explorist 500
i had the same problem you have to contact magellan and they will tell you it needs to be sent in for repairs and they will send you an email or give you a phone # for the closest repair center to you

check this link for the magellan technical support closest to you https://www.magellangps.com/about/contacts.asp

Oct 19, 2007 | Magellan eXplorist 500 GPS Receiver

2 Answers

Explorist 300 problem
Try to reseting to the factory defaults: Press menu - choose preferences - press enter choose reset default - press enter choose all - yes - press enter Good luck!

Dec 31, 2005 | Magellan eXplorist 300 GPS Receiver

Not finding what you are looking for?

View Most Popular

eXplorist 500 GPS Receiver

  • GPS

Related Question

Hi Guys: On turning on my explorist 400 a message appears. UNIT CURRENTLEY CONTAINS NO MAPS! INITIATING MAP UPLOAD This message wont go away, and all buttons refuse to work. The only way I can turn it off...

  • Magellan eXplorist 400 GPS Receiver

Open Questions:

0 Answers

inis there a way to downlod the instalatin program, my cd is not woking

Jan 22, 2014 | Magellan eXplorist 500 GPS Receiver

0 Answers

explorist 600 gps blank

Dec 06, 2013 | Magellan eXplorist 500 GPS Receiver

0 Answers

software upload mode active

Sep 27, 2013 | Magellan eXplorist 500 GPS Receiver

0 Answers

Microsoft Serial BallPort

Dec 08, 2012 | Magellan eXplorist 500 GPS Receiver

See all Magellan eXplorist 500 GPS Receiver Questions

Related Topics

Magellan eXplorist 500 GPS Receiver Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Magellan eXplorist 500 GPS...

Magellan eXplorist 400 GPS...

Magellan eXplorist 500 GPS...

Magellan eXplorist 400 GPS...

Magellan eXplorist 210 GPS...

Top Magellan GPS Experts

Marvin
Marvin

Level 3 Expert

83036 Answers

Will Halftowaite

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75871 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. eXplorist 500 GPS Receiver Manual

eXplorist 500 GPS...

Loading...