Question about Motorola Mobility RAZR V3

5 Answers

Motorola v3 driver

I would like to know how to download my pictures to my computer ??????

Posted by on

  • 5 more comments 
  • Anonymous Dec 28, 2007

    HI,

    Out of the blue my keyboeard stopped working, I cannot call out or receive calls, however, it rings and the ringer can be adjusted. Does anyone have ideas? It appears to be a common problem. Is this possibly the Keyboard as suggested in other problems? Or could this have locked without my knowledge? I cleaned sym and connections to no avail. Any help welcome. Thanks

  • Anonymous Apr 30, 2008

    motorolla v3x

  • l1coolg Jun 01, 2008

    Acquired USB cable and tried to download pictures from Cell Phone. Computer only aknowledges device detected. It does not say what device. When I go to My Computer it does not show any new devices. Not sure if I need Driver for Motorola Razr V3. Not sure if software needed also. Something called Motorola Phone Tools. Any Help arrpreciated. l1coolg@yahoo.com

  • Jeremiah Gardner Jun 04, 2008

    wizard said it cant find my phone and phone tools couldnt find it either

  • rayann Jun 08, 2008

    i need to download my pictures but i dont have any driver. what should i do?

  • Anonymous Nov 15, 2008

    how do i download pics from my motorola v3 to my notebook

  • mcastro1125 May 11, 2010

    m/kjyhtgfrdlgfsxdjkl,kmjgfdsz

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do i download pics from my motorola v3 to my notebook

Posted on Nov 14, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers
Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dear sir

How can I get a Motorola v3 driver?
pingwpng

Posted on Sep 14, 2008

When i plug the usb to my computer a pop up box show and said i need a driver to instal it

Posted on Jan 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,752 Answers

What you need to do is take the phone to a mobile repair center and have them replace the flex cable on the phone.

Posted on Dec 29, 2007

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

sandrew
  • 2961 Answers

SOURCE: my razr motorola v3 will not connect to my computer

I doubt your pc would be 64 bit, only 32bit, but you should have a cd and usb lead with the phone.

Posted on Dec 30, 2006

  • 43 Answers

SOURCE: to know my the free download software of my phone

For those who are having connection problem with moto

Step 1. Get the software

Go to Motodev and download Motorola USB Driver (you will need to register)

Also download your chosen p2k program e.g. p2kMan

It would also be a good idea to locate RSD Lite – you will have to use Google to find this as it is classed as warez and we cannot give
links.

Step 2. Install the driver program

Extract the file “Motorola_EU_Driver_Installation.msi” from the zip file you downloaded.

Double click on this file and the installation will start.
2j10nef.jpg

Click next and the EULA will appear
30kvfid.jpg

Click on "I Agree" (obviously having read the agreement first Angel), then next.

The program will now install
477ybv9.jpg

Click close to end the install procedure

During the installation process you may see the following screen 1 or
more times
2z3nku0.jpg

Should this appear hit "Continue Anyway"

Step 3: Install the drivers

You will now have a new program group in your start>programs menu -"Motorola Driver Installer", with a shortcut called "Motorola Driver Installer.exe" within it.

Make sure the phone is disconnected at this time.

Run this program, and it will check whether the drivers are already
installed, when this is complete you will see the following screen
3ynqjd2.jpg

Under "Operation Mode" (lower left), select "Clean and Reinstall" (the bottom option).

Then hit "Start"

The program will then do its thing. When it is finished hit "Exit"

You may get the message about Windows Logo testing again - if you do hit "Continue Anyway"

Step 4: Connect the phone

Make sure the phone is turned on then connect the USB cable. It is best
to use a USB port on the rear of the PC rather than front mounted ports
as these sometimes connect to the motherboard via a hub

When you plug the phone in Windows will find new hardware - Motorola
Phone (V3), then Motorola USB Modem. The installation should
complete without intervention.

You should now be able to connect using Mobile Phone Tools, the phone
should also be charging.

We now want to install the P2k Drivers. First make sure MPT is not
running.

Now with the phone still connected run one of the P2k programs, I generally use P2kMan - but thats just me. Its best not to use p2k Tools as this may start in AT mode and confuse matters.

When you do this Windows should find several new devices and after a
short while the new hardware wizard will run. In the rare event the new
hardware wizard does not start, install and run RSD Lite.

The first screen to appear asks if you wish to connect to Windows Update
4doul8l.jpg

Select "No, not this time", then click on "Next"
49ibkog.jpg

Choose "Install the software automatically (Recommended)", then hit "Next"

The driver for Accessories Interface is then installed, after a short
while the following screen is displayed
43zbj10.jpg

Click "Finish"

The new hardware wizard will then run again
4doul8l.jpg

Once again select "No, not this time", then click on "Next"
44vvxc1.jpg

This time the wizard asks for drivers for "Data Logging MCU Interface".

Choose "Install the software automatically (Recommended)", then hit
"Next"

Again the drivers are installed then after a short while the
following screen is displayed.
2en6n47.jpg

Click "Finish"

The new hardware wizard will then run for a third time

At the first screen select "No, not this time", then click on "Next" in the same way as before
2qixsnl.jpg

This time the wizard asks for drivers for "Test Command Interface".

Choose "Install the software automatically (Recommended)", then hit "Next"

Again the drivers are installed then after a short while the following screen
is displayed.
2iu6ni0.jpg

Click "Finish"

Your P2k drivers are now installed and the P2k programs should
recognise the phone

Remember if you connect using a different USB port in the future,
Windows will recognise new hardware and you will need to repeat these
steps

Step 5: Flash Interface Device

If at anytime you choose to flash your phone you will need the Flash
Interface device installed. This device is used to communicate with the
phone while it is in bootloader mode.

In order to run the hardware installation wizard for this device you
can do one of two things. Either use RSD Lite to flash the phone as
normal (browse to the file and hit start) and RSD Lite will switch the
phone to bootloader mode for you. Alternatively you can start in
bootloader manually (hold * and # while turning the phone on), then
connect the USB cable.

Either way the new hardware wizard will run again.
4doul8l.jpg

As before select "No, not this time", then click on "Next"
314uwpu.jpg

Choose "Install the software automatically (Recommended)", then hit
"Next"

Again the drivers are installed then after a short while the following screen
is displayed.
441m1jo.jpg

Click "Finish" and you are done - you can now flash your phone with RSD
Lite.

Once more remember if you connect using a different USB port in the
future, Windows will recognise new hardware and you will need to repeat these steps


Last edited by mikekay10 on Sat Jan 13, 2007 6:08 pm, edited 2 times in total

Posted on Jan 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Motorola phone that I need to download pictures from,but when I connect the phone to my computer,I get a message telling me to install motorola drivers.


Yeah,you need Motorola P2k Drivers to enable you synchronize you Moto V3 with your computer.The OS of your computer determines the P2k Drivers you need to install. But if you are using a WINDOWS SYSTEM , you may download the drivers from this link ..... http://forum.gsmhosting.com/vbb/f166/unlock-razr-v3-397679/
All you need is to extract the drivers to a folder in your Computer,Connect USB to your phone and computer and follow the instructions of the DRIVER WIZARD

Mar 11, 2011 | Motorola Mobility RAZR V3

1 Answer

I need the software for downloading pictures and printing them.


You will need the Motorola PhoneTools software and USB transfer cable to download pictures from your RAZR V3 and after they are downloaded you can print them from your computer. Click on the link below to view:

http://www.wirelessemporium.com/p-6916-oem-motorola-usb-data-cable-w--mobile-phonetools-cd-4-0-motorola-v3-razr.asp

Feb 04, 2011 | Motorola Mobility RAZR V3

1 Answer

I have to connect motorola v3 ith pc for pictures


just download the driver for motorola v3 and then install it.after that connect the motorola v3 with the computer provided.

Nov 20, 2009 | Motorola Mobility Mobile PhoneTools 3.0...

1 Answer

Download pictures from my motorola V3 RAZR


is that a razr v3 not v3x??well all you have to do is download the motorola drivers and p2ktools, p2k manager or skiman. connect your v3 via cable, install the drivers correctly and then the computer will detect your phone as p2k, if not, open one of the applications that you have downloaded and that should do the work.. then the application will read to your phone files and you can now transfer files from pc to phone and from phone to pc! you can also read the instructions on www.modmymoto.com! thanks and goodluck..

Oct 26, 2008 | Motorola Mobility RAZR V3x Cellular Phone

1 Answer

Motorola v3 driver


first you need to install the MObile Phone Tools software onto the pc then install the usb drivers and connect the phone to the pc via usb cable.

Jul 04, 2008 | Motorola Mobility RAZR V3

1 Answer

Downloading pictures from Razr v3 cell phone


just connect data cable and transfer pictures from pc to mobile

Jun 14, 2008 | Motorola Mobility RAZR V3x Cellular Phone

1 Answer

Motorola v3 free software upgeade


Hello,
For downloading pictures or mp3s from ur phone to computer, u need to have data cable with software it came with . Another alternative is to use memorycard reader. It is easy and fast method to download pictures or mp3 s in it. When u insert memory card is inserted in the card reader, is shows a new drive. In it , some folders are shown eg. sounds, videos, pictures, etc. U can download or transfer pics or sounds as u do in ur PC.
For software, it is not possible to download softwares like as in NOkia. U can download some of them from sites such as wapbu.com, getjar.com, etc. But u most run these sites from ur mobile (gprs service).
i m looking for ur kind feedback.
Sajan

Apr 28, 2008 | Motorola Mobility RAZR V3

1 Answer

Motorola razr


what ever you will do you cant download a usb
driver for motorola v3 from the internet. id rather advice you to buy a bluetooth device and connect it to your computer for you to transfer your pictures to your pc... gudlak...

Apr 17, 2008 | Motorola Mobility RAZR V3

3 Answers

Can transfer pictures from my Razr v3 to my computer and visa versa


Your razor phone will connect to your pc with updated software from motorola Don't worry it is free. after you download the software run the program then connect your phone with the phone powered off, then turn on your phones power, it takes a minuet for the phone to connect to the program then your computer should recognize the phone. Need more help you can email me at JV.Lund@gmail.com

Jan 07, 2008 | Motorola Mobility RAZR V3c Cellular Phone

3 Answers

I need to get pic


you need motorola phone tools and a usb cord--I could never get the bluetooth to function.

Nov 09, 2007 | Motorola Mobility RAZR V3c Cellular Phone

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

792 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Virgil Wolter

Level 1 Expert

29 Answers

vince

Level 3 Expert

1216 Answers

D. E. Hev

Level 3 Expert

1181 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...