Question about Panasonic AG-185 Camcorder
There is an error massage on the view finder - screen.
CODE : F O5
Pls, describe the solution?
e-mail : randinu2007@gmail .com
I fixed 2 cameras with same problem "Push Reset Switch"
Removed small foreign plastic object which was jamming mechanism without stripping.
In both cases a very tiny piece of one of the broken plastic 'catch' of the door was the problem.
Turn unit upside down and give it a good shake-up and it will drop off & problem solved.
Hope this helps.
Posted on Feb 07, 2008
Exactly the same problem as everyone else. There's bound to be someone who can offer advice on what to do. The camera obviously recognises the fault as F05, but where can you reference the remedy to this F05 code? It's not in the manual as far as I can see
Posted on Mar 22, 2010
SOURCE: Hi, I have a Panasonic
the ribbon cable that carries the signal to the screen sounds like it has become damaged
thatcan cause the problem
when it is all the way open it stretches the cable resulting in a gap to form, so when only open part of the way there is still a signal. see if there is anything in the hinge that might be causing the stretching of the cable, as that is almost surely the problem..
Posted on Dec 16, 2010
SOURCE: I have a nv-gs40 which
-try a power cycle
*remove battery and disconnect from power cord
*i would also suggest to check the tapes if they're clean
*try to clean the tape head inside the tape deck(tape head: the one that reads the tape)
-try using a soft and dry Q-tip to clean the metal parts inside the tape deck(dont use or apply any liquid solutions. just a plain soft dry Q-tip.
Posted on Jun 05, 2011
Tips for a great answer:
Dec 16, 2010 | Panasonic NV-GS17 Mini DV Digital...
Aug 19, 2008 | Panasonic NV-DS55B Mini DV Digital...
Feb 20, 2008 | Panasonic NV-DS55B Mini DV Digital...
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: