Question about Office Equipment & Supplies

1 Answer

ML-201OR Laser Printer

Hi there

I will be very grateful if you can tell me the no doubt simple answer to this.

My new printer is great but it only prints faint. On the cover a note says "Toner Save" and next to it is a small light which is illuminated. I am sure if I can switch off this facility I can get darker print outs: but the instructions are minimal and I cannot find a switch anywhere. I have been though the meagre help section. Can you advise ?

With many thanks

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers


If the printer is connected to a pc then you will need to go into the start menu by selecting start at the bottom left corner of the screen then select control panel, then printers and faxes. right click the printer icon in question and then select properties. Then select printing preferences. in this section you should see a setting for print quality. i would suggest settiing it normal.

If the printer is a photo printer, i suggest removing the cartridge and re-inserting it. if that doesn't work then it ensuring that you hear a click. if that doesn't work then it would seem to indicate that you are need of a new cartridge or toner.

Hope this helps


Posted on Dec 28, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

ML 2010 Laser Printer: have aquired a samsung ml-2010, have installed dri...


have you tried replace a new toner. If new toner also giving out noise. it is most likely the main drive issue.

May 17, 2010 | Samsung ML 2010 Laser Printer

1 Answer

Samsung ml 2010 in when start print tow led blinking


Think you may need to be a little clearer with your question to get any sensible answer. If you ar referring to the toner light flashing then you simply need to buy a new toner and replace it.


Oct 23, 2009 | Samsung ML 2010 Laser Printer

1 Answer

I have a Samsung ML-2010. I refilled the cartarage once and it worked great. I have refilled it a second time but now the print is very light. I have vibrated the cartarage to ensure that the toner was...

hi this is kamal...

just purchase your printer catridge coz ur catridge is not working properly.. so u need to change pls

and let me know this information was good or not

best regards
kamal singh

Oct 08, 2009 | Samsung ML-2240 Laser Printer

2 Answers

Hi, I have a Samsung ML-1710P. Have just bought a new toner cartridge, when I print the paper ejects but with all the printing is done at the lower part of the page and the red error light shows. Having...

No need to buy another printer,it is good printer now this time Just thoroughly service it then solve your problem.How much money the new Toner please comments me.I shall help you.How can possible? use it simple coast.

Sep 18, 2009 | Samsung ML 1710 Laser Printer

7 Answers

Toner exhausted replace toner in Laser Printer SCX-4300

My laser Printer shows a message and do not prints any document. When i try to print any document. My printer shows a message "Toner Exhausted, Replace Toner". Plz tell me how can i solve my this printer's solution.

Mar 25, 2009 | Samsung SCX-4300 Monochrome Laser...

3 Answers

Samsung ML-2000

from where i can download printer driver for samsung ml-2000 series laser printer

Nov 06, 2008 | Samsung ML-2551N Laser Printer

2 Answers


Here are steps with proper images click the link below

Change toner in ML-1610

If you have any doubt or queries post back

Thanks for using Fixya


Sep 28, 2008 | Samsung ML 1610 Laser Printer

3 Answers

I can't turn toner save mode off!

You need to press the button for about 1 or 2 seconds then let go. If you don't press it long enough it doesn't work, same if you press it for too long.

Sep 26, 2008 | Samsung ML 2010 Laser Printer

1 Answer

Samsung ML-1651N Printer

I have the exact same problem with my ML-1651N printer. It started out as an annoying problem that i solved by pulling the paper try out and then pushing it back in again. Now that solution doesn't work anymore.

Aug 23, 2007 | Samsung ML 1651N Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

8074 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

82313 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides