Question about Rosewill R700J 17" Flat Panel LCD Monitor

1 Answer

Monitor goes blank less than a second after turning on.

I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. What's up? I got my rosewill flatscreen as a hand me down from my father. I've had it for several years now. Was working fine until a month ago. When I turn the computer on the screen goes black after 1/4 of a saecond. I have to turn it off and on anywhere from 10 to 20 times before it stays on. I have checked all plugs to the computer and outlets. I have absolutely no idea whats causing this. I do have my original monitor that came with the computer just incase. But who wants to go back to a big bulky moniter that takes up the whole desktop. ROSEWILL R710E LCD MONITOR

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. What's up?
I got my rosewill flatscreen as a hand me down from my father. I've had it for several years now. Was working fine until a month ago. When I turn the computer on the screen goes black after 1/4 of a saecond. I have to turn it off and on anywhere from 10 to 20 times before it stays on. I have checked all plugs to the computer and outlets. I have absolutely no idea whats causing this.

Posted on Dec 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor goes blank after 2-3 seconds


could be hardware failure but i would try buttons on front of monitor first. notice, usually green led on monitor is green, if it goes to amber, you are loosing sync pulse.

Aug 20, 2009 | Computers & Internet

1 Answer

Monitor goes blank less than a second after turning on.


Sounds like either there is a bad connection from the computer to the monitor, or the monitor has a faulty power regulator, causing the monitor to overheat prematurely, and shut off.

Feb 21, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Screen Goes Blank


Ive seen this on other monitors. Look for a 1 and 2. Some monitors do NOT auto detect a signal, and this one might not. Look for a way to set the monitor from Digital input to VGA input. Try that and see.

Jul 21, 2009 | Dell E173FP 17" LCD Monitor

1 Answer

Monitor is blank/dimension 2400


If you put a spare monitor on your computer and everything is fine I'd say it has an electronic problem. If the screen is still blank I would look at the video card or PC itself as the problem. Just for fun check the video cable for bent or missing pins.

Mar 23, 2009 | Computers & Internet

1 Answer

Monitor goes blank less than a second after turning on.


Monitor is bad for sure. Try another known good monitor on your computer and if the problem stops then you know for sure the original monitor is bad. Hope this helps.

Feb 01, 2009 | Dell Dimension 3000® Pentium® 4...

2 Answers

Monitor goes blank less than a second after turning on.


there is an hardware issue in your lcd it needs to change one of the capaciter please take it to a lcd technician
thanks

Jan 24, 2009 | Acer AL1715 17" LCD Monitor

2 Answers

Monitor goes blank less than a second after turning on.


YOU NEED TO HAVE THE INVERTER BOARD REPLACED.
YOU CAN USUALLY FIN THEM ON E BAY OR YOU WILL HAVE TO TAKE IT IN IF YOU DON'T FEEL COMFORTABLE REPLACING IT YOURSELF.

Dec 18, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Monitor goes blank less than a second after turning on.


the moniter may be having  some technical errors   maybe the IC's has got corrupt 

you need to call the seller of the moniter

Sep 06, 2008 | BenQ FP71G 17" LCD Monitor

1 Answer

Monitor goes blank less than a second after turning on.


do you have an aftermarket video card. In the bios you have to tell the computer if it is looking for a agp/onboard or PCI video card. Either that or the video driver or settings are wrong Try safe mode to check

Jun 25, 2008 | Dell Dimension 2400 PC Desktop

2 Answers

Monitor goes blank less than a second after turning on.


Beautiful screen, lasts about for a few minutes, goes black. Power button still green. If I turn it off, and then back on, it works again for a while. Any ideas?

May 11, 2008 | Mag Innovision LT982s 19" Flat Panel LCD...

Not finding what you are looking for?
Rosewill R700J 17" Flat Panel LCD Monitor Logo

1,049 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rosewill Computers & Internet Experts

Ian Ballard

Level 1 Expert

20 Answers

Jim Thurston

Level 3 Expert

672 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Rosewill Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...