Question about Dell E153FP 15" LCD Monitor

1 Answer


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Do a visual inspection and see any thing is burnt or open.
ex: fuses , cracked board , backlight went bad, if the power light is on but no picture, the backlight may be no good, just take flashlight and aim it through thr back of the lcd screen and see if there is any active video.

Posted on Jan 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Monitor Not Powering On

Did you tried changing the lcd settings to default?

Feb 24, 2014 | Acer S231hl Bid 23" 1080p 5ms Widescreen...

1 Answer

No power to computer moniter

1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

Jan 18, 2014 | ViewSonic Computer Monitors

2 Answers

The monitor does not power up. no power light comes on, there is nothing that shows up on the screen. All cables are well connected and yes the power switch is on.

check by changing the power cord if this does not solve the problem the fault is in the power of the monitor better call technician or take it to the service centre

Aug 02, 2011 | Samsung SyncMaster 940UX LCD Monitor 19...

2 Answers

My acer al1914 wont power on... was working fine,

The usual suspects, blown fuse, blown capacitors, bad solder joints. Any of this conditions could be your problem.

Jul 16, 2010 | Acer AL1914 19" LCD Monitor

1 Answer

My monitor won't come on, can't even get a power light.

this is the power supply problem. once again check with another good working power cord for the may work.

May 04, 2009 | Westinghouse L2046NV Monitor

1 Answer

Acer AL1916 can't start

If you press the power button and nothing comes on at all then something isn't providing power to the laptop as it should and you may likely need to replace the battery or the power cord.

Find a replacement battery. Change your battery with a new one then plug it up and turn on to see if this works.

If replacing the battery doesn't work then replace the power cord and trying turning it on again. If this doesn't work either, you have a more serious issue going on.

Not too long ago, I was on vacation, my laptop had been working fine until suddenly it wouldn't come on at all. I went into the office to grab a new battery and power cord. (I work on computers so I had spare parts in my office/Tech Room.)

I got home and replaced the battery then tried to turn it on using the old power cord...didn't work. This was a brand new battery so now I knew that I could rule out the battery as the issue...the only two things left to troubleshoot were the power cord and the laptop itself.

I put my old battery back in the laptop then tried to turn it on using a different power cord and it worked. I didn't need to replace my battery or laptop. The power cord had failed.

I hope that your issue is as simple as this solution. Try confirming whether your battery and power cord are still may just need to replace one or the other.

Thanks for using Fixya.

Share your experience by rating this solution.

Mar 29, 2009 | Acer AL1916B 19" LCD Monitor

3 Answers

Monitor will not power on....

I just repaired one. Symptom was no power at all. When I plugged it in, I could hear the switching supply making a noise, like it was trying to turn on. I opened it up and It ended up being 2 capacitors in the power supply section. I seen the tops were swollen, they were 1000uF 10V. They were for the 5volt power section I believe.
I think they were C824 and C825. I removed both of them and replaced them with one 2200uF 10V cap. I powered it up and it works now.

Oct 24, 2007 | Dell UltraSharp 1905FP 19" LCD Monitor

3 Answers

DVI input on monitor not working

Contacted viewsonic about this issue- they suggested- have both dvi and vga hooked up to same machine. start with poweroff on both. power on monitor, then power on computer. when you see display coming from the vga, power off pc, then disconnect vga cable, turn off power to monitor, disconnect power cord from monitor for 5 + seconds, reconnect power cord, power on monitor, then power on pc.
If this doesn't work to get the dvi working, (as happened to us) we returned our monitor for a replacement, since it was still under warranty.

Sep 17, 2007 | ViewSonic VX2025wm 20.1" LCD Monitor

1 Answer

No power

Check the fuse, if that's OK check the wall socket works by plugging in something you know to work. If the monitor has an external power brick check if it has any indicator lights and if they are on.

Apr 23, 2007 | Liquid Video E17LCD1 17" Flat Panel LCD...

Not finding what you are looking for?
Dell E153FP 15" LCD Monitor Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

William Miller
William Miller

Level 3 Expert

8795 Answers

Are you a Dell Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides