Kenmore Dryer 70 Series. Push switch in and just a little clicking noise. No motion. Took top & front panel off, belt appears to be fine. Suggestions Please??
My dryer shuts off before the timer is done. And when you set the timer you can't hear it...
(More)
My dryer shuts off before the timer is done. And when you set the timer you can't hear it "tick". The dryer does not work at all now.
Kenmore comercial electric dryer makes buzzing noise and won't restart after you open the door until...
(More)
Kenmore comercial electric dryer makes buzzing noise and won't restart after you open the door until you put more money in. Buzzing kinda reminds me of a motor starter problem but i couldnt find a starter.
I have a Kenmore 70 series dryer that wont heat. I've already replaced the igniter, not sure what...
(More)
I have a Kenmore 70 series dryer that wont heat. I've already replaced the igniter, not sure what else it might be?
when i push buttons nothing lights up and nothing happens. it is a kenmore, and around 5 years old....
(More)
when i push buttons nothing lights up and nothing happens. it is a kenmore, and around 5 years old. it isn't the circuit breaker, because it is the same breaker that runs the microwave and the microwave works.
The idler pulley on an older GE dryer does not tension the belt. The idler pulley is mounted on a...
(More)
The idler pulley on an older GE dryer does not tension the belt. The idler pulley is mounted on a spring rod, but the rod's neutral position does not tension the belt. The rod is attached to the bottom of the dryer near the wall. Is the solution to simply bend the rod to a position that would apply tension to the belt? Thanks. ron