Question about Logitech Cordless Internet Handset Phone

3 Answers

The phone does not ring

I have set the ringer in the options to the logitech phone and saved but the phone does not ring with incoming calls

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers
Re: The phone does not ring

I have contacted Logitech, and they can confirm that there is no solution. This is a Vista issue.

Therefore, if you have Vista and you use SkypeIn to receive incoming calls - then DO NOT PURCHASE THIS PHONE until a Logitech/Vista patch is released.

Posted on Sep 05, 2008

Re: The phone does not ring

You all must be using Vista, this is a common problem in Vista, I have the same issue.

Posted on Aug 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: The phone does not ring

I know this is not a answer to the problem.

But for Logitech to say it's a Vista 'issue' is rubbish, Vista has been out for too long now to be blamed for them being lazy or disinterested.

Can I have a refund?

Posted on Oct 20, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Cisco SPA502G does not ring for incoming calls

It is a problem with the router. if you assign it a public ip adress it will stay on line the other option is a router that will allow consistent nat translation

May 12, 2014 | Cisco SPA502G IP Phone

1 Answer

We have issues with the ringer..

it seams that you have set the ring to silent mode to change the ring type go to menu --> settings --> basic --> ring type --> and select the ring type the steps may not be the exact but they are similar

Mar 31, 2010 | Mitel 5340 IP Phone

1 Answer

Hello, I have a Nortel 1140e with SIP firmware that has been configured to work with my home VOIP system. The basic features work, but the phone doesn't ring on incoming calls and there's an audio delay...

First I will suggest you to upgrade the Firmware....check the ringer tune and volume is OK ... or try pressing Feature key * 6 and Press 1,2,3,4 or next to hear different type of ring types .....Press OK to save it....Now Try....Further result please let us know...Thanks for being with Fixya....Good Luckmoz-screenshot-1.pngmoz-screenshot.png

Nov 08, 2009 | Nortel 1140E

1 Answer

Does not ring

The Volume key allows you to adjust the volume level for the currently active audio device (handset, headset, or speaker). When no audio devices are active, pressing the Volume key adjusts the ringer volume.

Adjusting the Volume of the Ringer, Handset, Headset or Speaker
Note: By performing this function, default volume level will be replaced.
  1. Press the up or down arrow at either end of the Volume key to reach the desired volume level.

  2. When you are satisfied with the setting, press the Save softkey.
Note: When adjusting only the ringer volume, there is no need to press Save. The settings are automatically saved upon adjustment.

See the below link for user manual

Jun 20, 2009 | Cisco 7941G IP Phone

4 Answers

Cisco ip phone 7940 does not ring for incoming calls.

It sounds like you have enabled Do No Disturb accidently. This can be turned on and off by pressing the DND softkey button along the bottom of the LCD display. You might need to press the 'more' softkey to display all options.

Jan 27, 2009 | Cisco 7940 IP Phone

1 Answer

Cannot Hear the Ringer

could be set to "no ring" on the system, if so it will never ring, sounds like you need to talk to your helpfull sys admin!! ;-)

Dec 09, 2008 | Mitel 5220 IP Phone

1 Answer

My phne will not ring on my cit310

On Yahoo Messenger:
On the top section click on Messenger and then on Preferences. On the 'Yahoo Messenger Preferences' window, click on 'Calling & Audio'. Make sure that Microphones, Speaker and Ringer are all set to 'USB Audio Device' and that the 'Play a Ringtone when I receive a call' is checked. 

Jun 19, 2008 | Linksys CIT310 IP Wireless Phone

2 Answers

You advice was such a blessing

Haven't experienced this one, it should open if you right click on the icon in the tray at the bottom.

However you should still be able to change your Skype options, click on "skype", then "Tools", then "Options", then "Audio Settings", change microphone and speakers to "logitech" or whatever your computer has listed your device as. This should have the effect of changing logitech to "use handset" and gets the same result. Unfortunately the phone will never work as good as it should, for instance I can't make test calls. I hope this helpful.

Jun 13, 2008 | Logitech Cordless Internet Handset Phone

Not finding what you are looking for?
Logitech Cordless Internet Handset Phone Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech IP Phones Experts


Level 1 Expert

58 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

6993 Answers

Are you a Logitech IP Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides