The camera is in standby

Hi

Thanks for using FixYa. Please remove the batteries and try using different ones, that might make a difference. If that doesn't help then try and reset your Camera by removing the memory card and then press the power button for 10-15 seconds. Now, leave the camera alone for 20 minutes, insert the card and then the battery turn it on. Also try & follow this procedure for Hard Reset--
1. Set the Mode switch to “Play >”. 2. Press the “MENU/OK”.
3. Now press right arrow button & then down arrow button.
4. Now again press the “MENU/OK” button, wait for 5-10 seconds and then again Press the MENU/OK button.

Please note that this will delete all user defined settings from your camera, remember to remove the Memory card while performing this reset.


Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks

Rylee