The remote is working for all the button press except for "Play", "pause", "stop", "ff', "rev", "rec" buttons. The light in the remote glows, when any of these are pressed, but the corresponding action is not invoked.. I tried resetting the remote with the code for my device, as specified in the manual. But still its not working. Please help..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
most universal remotes usually only do the simple commands like power, play, fast forward, rewind, pause, stop.
It may not be capable of setting the time.
If the remote is able to be switched to just work for your VCR you could try to press the menu, input or setting buttons to bring up any type of menus that would possibly help. If that doesn't work you may not be able to set it with the remote.
Try contacting Mega Control to request a manual (including a code list). Meanwhile, use the "code search" feature of your universal remote (although you don't identify it in the button list) to find a code for your device(s).
It sounds like a contact fault to its buttons inside the remote control. Your remote control need to have cleaned. To clean it, you have to open it and take the printed circuit board inside it. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ One among the post by this site have details about how to clean and check a remote control. Surf the site with patience.
There is most likely nothing wrong with your remote. I just had exactly the same issue with my SE-R0161 remote. (I had just changed my remote batteries too and was getting a DR-2 code on the Toshiba DVR RD-XS52 unit's display.) My DVR and my remote had to be realigned so that they both have the same infared (IR) code. The remote and the DVR can have DR 1, DR 2 or DR 3 as remote codes. Pg 54 of the Toshiba Installation Manual explains how to align both your SE-R0161 and your based unit so that the remote works again. Good luck. Hope this helps.
u must press and hold the botton titled as code search until the red light is lit. Once you do so, you program in one of the 3-4 digit codes. I am actually dealing with the same delema. I have an Orion tv except i have no clue what the code for it is. If you could help me out with the code that would be great