Question about Oritron DVD600 DVD Player

1 Answer

I'm getting a wobbly, scrambled image

Hi there

I went to view a dvd (and I tried a few) today after not using my player for a few weeks and the image was all over the screen, moving from side to side and up the screen like a scrambled image (I almost feel that if it had a vertical/horizontal hold that I'd be able to fix it).

Thanks for any suggestions you can offer,


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers
Re: I'm getting a wobbly, scrambled image

Yes I understand what you mean to me. If your DVD player is running through a coxial [analog] output/input. Try retuning your television presdet for the player. If you have a digital output, rca,av,svideo make sure that the plugs are properl;y inserted and not faulty and are inserted in the RIGHT plug. If your DVD player is running through a surround sound video router test it without running ir through the surround. Hope this helps.

Posted on Dec 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can record on DVD disc will not play on DVD player

Make sure the materials you're trying to record onto the DVD
is not Copyrighted. Try to record a normal TV program onto your
VHS, transfer it to your DVD and then play it. See if that will
work. A VHS movie is usually Copyrighted and Protected by
Macrovision. The picture output can be displayed on a TV set
for viewing but is scrambled black to a DVD Recorder.

Jul 16, 2011 | JVC DR-MV100B DVD Recorder/VCR

4 Answers

Samsung DVD-V6800 combo wont read any DVD's

When you put disc in dvd player tray, optical laser got initialized automatically and all previous data in memory of player erased.
You should not worried about laser movement because its control by servo section of dvd player circuitry.
Kindly contact Samsung to provide warranty cover of your newly player.
Need further info, let me know please.

Oct 27, 2008 | Samsung DVD-V6700 DVD Player/VCR

1 Answer

All of a suden will not read DVD's "incorrect disk" We had a power outage last week, but that has happened before with no issues. Someone said the needle may be misalligned.

The processor in your player may have gotten scrambled from the power outage. Try pulling the AC plug and letting it stew in its own powerless juices overnight and then try it again. BTW, there is no 'needle' in any player; they use a tightly focused laser beam to read the disc.

Jan 03, 2010 | Sansui VRDVD4005 DVD Player/VCR

1 Answer

Dvd recorder has copy protected message


the tapes that you can,t copy are protected, manufacturers used to put a high pitched frequency on the tapes themselves, which would in theory cause a scrambled frequency. the only suggestion i have for you, is to play the tape onto a television, and use a camcorder to record the image from tv to camcorder, then camcorder to pc, and use some good editing software to create the dvd.
alternatively, you could try using a second dvd player, and use your recorder as the second device.
The final but more expensive option, is to look for a way to input the recorder, direct to PC. which you would use picture out, to graphics card input, and the red and white ( Audio ) for the stereo Sound output. does your player or tv have An spdif connection or similar, you may be able to output to camera, rather than to dvd.
Where theres a will, theres a way, but these are a few options.

****Please note:- this information is supplied only as you have the original Movies***

Bear in mind, it is illegal to copy protected content. However as you own the originals, this information is provided to enable you, to backup your Purchased Content.

Thankyou for using fixya.

Mike @ compurepair.

Jun 15, 2009 | JVC DR-MV100B DVD Recorder/VCR

1 Answer

System stuck on "hello"

I had this same problem and held down the play button after unplugging the player. What i found was that i could boot up, but that shortly after the screen would scramble and alternate between static images and a green screen that flickers. I believe the single chip that drives this has failed.

Dec 23, 2008 | RCA DRC-285 DVD Player

1 Answer

Samsung dvd player p142

use your remote to change it.

Dec 17, 2007 | Samsung DVD-P142 DVD Player

1 Answer

Scrambly TV

take a quick peek in the manual and find out where to disable the progressive scan features. may be a button on the back, or you may have to go through the on screen menu to find it. take the disc out and see if you can view what's on screen. or since you said you had a couple of movies that did work properly, put one of those in, start the movie, go into the dvd player setup menu and disable the progressive scan settings

Aug 13, 2007 | Sungale DVD-2026 DVD Player

2 Answers

Dvd recorder

sounds like the video codec got scrambled. if you are running windows, then try using restore [start-programs-accessories-system tools-restore]. if you never turned restore feature on, then re-install the DVD software

Jun 03, 2007 | Lite On LVW-5045 DVD Recorder

Not finding what you are looking for?
Oritron DVD600 DVD Player Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oritron DVD & Blu-Ray Players Experts


Level 3 Expert

4502 Answers


Level 1 Expert

11 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers

Are you an Oritron DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides