Question about Rosewill 19" 12MS DVI R911E LCD Monitor

2 Answers

FLOATING BLOCK I HAVE A ATTENTION INPUT NOT SUPPORTED BLOCK THAT FLOATS AROUND ON MY SCREEN I CAN'T GET RID OF...I KNOW IT SOUNDS STUPID /CAN YOU TELL ME WHAT INPUT ITS TALKING ABOUT????? OR HOW TO RID IT???

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 238 Answers

Hi, it means, u need to change the input mode i.e pal/ntsc/vga..etc or whatever options avilable in the LCD menu..let me know

Posted on Dec 30, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Turn on your computer. After Windows is on, click - Start -Control panel - Display - Setting - Screen Resolution (set to 1280 x 1024). then click ok.

Your floating box will gone.

I got the same problem and got the solution from rma@rosewill.com.

Hope this will help you.

Ringo

Posted on Mar 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just hooked up one of your monitors and there is a sign floating on the screen that says "attention input not supported" what do I do?


try lowering your resolution and see if it goes away.. start with low VGA and move up the list of supported values.. it sounds like a mismatch. also check your geometry (16:9 or 4:3 for example.. it is hangs off the screen it will give an error like that.

Jun 26, 2014 | Envision Computers & Internet

1 Answer

How can I tell if a WM48 Zoeller Sump pump is operational. It appears the water level is over the float.


Depending on the sensitivity of the float switch you may find that the float must be completely upside-down for the pump to turn on. The easiest way to check if the pump works is grab the float by hand and hold it in the inverted position - if your pump kicks in and starts pumping you know the pump itself works and you may want to adjust your float (I use tie-straps around the handle and around the float cord to artificially shorten the float). If your pump does not pump water when the float is inverted try shaking the float to see if the inner switch is stuck. Hope that helps.

Mar 25, 2011 | Heating & Cooling

1 Answer

Floating box telling me to adjust to recommended screen resolution which is correct, can't get rid of floating box on a blank screen


restart the computer immediatly press f 8 and press frequently f 8 untill menu appears then highlight on "enable vga mode" and press enter your problem will be solved

Mar 30, 2010 | Samsung SyncMaster 913N 19" LCD Monitor

1 Answer

Input not supported - floating gray message Win 7


Hi,
You haven't specified what monitor you use but the gray message is most likely due to your screen not being able to handle the high resolution. Try setting it to a resolution below 1600 x 1200.
Best wishes,
Graemevm

Dec 15, 2009 | ZT Group Cisnet PC Desktop

1 Answer

My laptop got broke, i'm using a small flatscreen monitor plugged into the back. a screen says "ATTENTION INPUT NOT SUPPORTED" just keeps floating around the screen. i don't know how to fix it


Start in safe mode and change the resolution to 1024x768 and 60Hz refresh rate. Restart and reset the resolution at the native of your display and 60Hz refresh.

Oct 28, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

Floating box


erm......reduce your graphic card output.

Sep 09, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

Input not supported is floating round my monitor screen how do i get rid of it


You probably need to change the resolution setting in your computer display settings to a setting that is supported by the monitor.
Your resolution setting right now is probably too high to be recognized by the monitor.
1440x900 should be the resolution setting for an AL1916w if your video card will allow that setting
Fran

Jul 19, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

Dell flat screen goes white and colored block appears and floats


Check that your monitor is connected properly and tightly to the computer. If it is, then the monitor may be bad. Borrow a friend's monitor and try to see if it works, if someone else's monitor works, then replace your monitor.

Mar 11, 2009 | Dell gx 150 p3...

1 Answer

FLOATING BOX WITH ATTENTION INPUT NOT SUPPORTED


Your monitor has several different video inputs.
Go to the configuration settings on your monitor and select the video input that matches the video cable from your computer.

Nov 12, 2008 | Computers & Internet

Not finding what you are looking for?
Rosewill 19" 12MS DVI R911E LCD Monitor Logo

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rosewill Computers & Internet Experts

Ian Ballard

Level 1 Expert

20 Answers

Jim Thurston

Level 3 Expert

672 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Rosewill Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...