- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The person who programmed your radio decided if and how the channel scanning would function, and whether or not the person using the radio would be able to program a scan list, and if so, which switches or buttons to use. It was all determined using computer software and by connecting the computer to the radio. Maybe you have a 3-position switch. Maybe by putting the switch in a certain position, you can program the scan list yourself. Maybe when the switch is in the right position, then pressing a side button turns on a green light to indicate that you've just added that channel to your scan list. Pressing the same side button again turns off the green light to indicate that you've just removed that particular channel from the scan list. Do this for all 16 channels, then put the 3-position switch into the scan-on position. Instead of a 3-position switch, the person who programmed your radio may have decided that the 2-position concentric switch would be used for programming your scan list. If you're lucky, then your radio has an LCD display. If so, then select PROG and look for a blinking square symbol to tell you when to program your scan list and look for a letter Z with an arrow on it to tell you that your radio is scanning. On the other hand, the person who programmed your radio with a computer may have decided that you did not need to have and of these options enabled.
Setup codes to check with LG brand TVs are 0734,0722,0711,0000,0793. If you wish to get more setup codes, three digits, four
digits or five digit ones, check this link.
Pull up older posts. Setup code
list and setup instructions to some popular model remote controls are given.
Firstly, you need to program your favourite frequencies into it, before you can receive anything, all the info on setting up your scanner is in the user manual that came with your scanner, if you bought it new, that is.
You will need to program in your local channels - ANALOG ONLY will work, not Digital. I suggest you go to "Radio Refererence DOT com" and go to their database; select your state, then your county, and it will list many frequencies for you to program to your radio. Also, SOME, not many, but SOME, Radio Shacks actually have a ham radio guy working there that can help you program your radio or help you 'CLONE' it from another identical radio. Good luck, and let me know how it goes. Happy New Year my friend.
On the CP200 radio the scan feature must be programmed into one of the side buttons of the radio, plus the channels must be select to be in the scan list. Your radio would need to be reprogrammed to scan the channels you want to scan.
Programming requires a RIB (radio interface box), cable, and Motorola proprietary software. Your local Motorola dealer should have a subscription to this software and be able to program the radio to scan.
you cant delete or remove or edit the program list or duplicate channels. i have a 32 inch white uniden lcd tv ... i emailed uniden customer service to ask the same question, the response was the function to remove edit or delete is not present on the range of uniden tv's.
Unfortunately, I think this is a common problem with these radios. I have a brand new BCT8 and it started to not receive anything on the pre-programed highway patrol after using less than a month. Unfortunately the best bet would be to contact Uniden which they will probably tell you to reload the firmware (which won't solve the problem) or send it to them to fix.