Question about Panasonic DVD-RV31 DVD Player

2 Answers

Dvd reading problem

I have a panasonic dvd-rv31 dvd player. it wont rean any dvd's and gives a error of h02. i opened the player a put a disc in. it did not spin.i spun the disc and it started working until i pressed stop. it will not spin on its own , it needs a push start. what do you think is broken on this and is it worth repairing

Posted by on

  • kenaldo Dec 28, 2007

    dvd will begin playing, but then will freeze. will commence playing again but in fits and starts. Sound also drops out. player will not respond to remote commands.Sharp Dv - NC80

  • Anonymous Jan 03, 2008

    Player will not read...Gets a "H02" error code. Does not sound like disc is spinning. Tried to "initialize" the player per instructions in Manual. No good.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

The Spindle motor is defective, replace.

Posted on Feb 16, 2008

Ad

Cdasdsad

Posted on Feb 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error H02 for panasonic dvd s35


My Panasonic DVD Player Model S55 does not read the DVD disk. I get a H02 then no disk reading on the display.

Jan 17, 2010 | Panasonic DVD-S35 DVD Player

1 Answer

ERROR H02


Spindle motor in DVD mechanism require replacement, not practical to repair, just buy new one, upconverting DVD player would cost you less then repair of your old one.

Dec 01, 2009 | Panasonic Televison & Video

1 Answer

Panisonic DVD RV-31 Wont read any DVD...shows a "Ho2" code


The motor is on its way out - the H02 code indicates motor failure as in it cannot spin the disc. You can sometimes fix it but for how long is anyone's guess. Disconnect from the power, remove the three rear screws and two screws on each side (total 7) and lift off the outer cover. Now if you carefully reconnect the power BE VERY CAREFUL NOT TO TOUCH ANY PARTS INSIDE THE CASE and put a DVD disc in as per normal, you'll will see that when the tray closes, the upper platen (a honeycomb disc) that sandwiches the DVD to the lower platen does not spin - it should. Give a gentle spin clockwise and it should spin up and the DVD will play. You may need to restart if you missed your chance first time. If you switch off and on, eject and close the tray, the spin should happen as normal. If it doesn't, your motor is knackered and not an economical repair. Buy a new player. If it spins time and time again, you may well have temporarily fixed it for a while.

Jan 10, 2009 | Panasonic DVD-RV31 DVD Player

1 Answer

Panasonic DVD RV31 does not read DVDs created by Windows Movie Maker


The only thing that has worked for me is to make a copy of the disk after burning it in Movie maker.

Cordell

Jul 06, 2008 | Panasonic DVD-RV31 DVD Player

2 Answers

DVD player will not read any disc


The motor is on its way out - the H02 code indicates motor failure as in it cannot spin the disc. You can sometimes fix it but for how long is anyone's guess. Disconnect from the power, remove the three rear screws and two screws on each side (total 7) and lift off the outer cover. Now if you carefully reconnect the power BE VER YCAREFULLY NOT TO TOUCH ANY PARTS INSIDE THE CASE and put a DVD disc in as per normal, you'll will see that when the tray closes, the upper platen (a honeycomb disc) that sandwiches the DVD to the lower platen does not spin - it should. Give a gentle spin clockwise and it should spin up and the DVD will play. You may need to restart if you missed your chance first time. If you switch off and on, eject and close the tray, the spin should happen as normal. If it doesn't, your motor is knacked and not an economical repair. Buy a new player. If it spins time and time again, you may well have temporarily fixed it for a while.

Jun 17, 2008 | Panasonic DVD-RV31 DVD Player

2 Answers

DVD-RV31 with H02 code


The Spindle motor is defective.

Feb 08, 2008 | Panasonic DVD-RV31 DVD Player

1 Answer

Panasonic dvd sa-dp1


The Spindle motor is defective.

Jan 19, 2008 | Panasonic DVD-RV31 DVD Player

1 Answer

Plays but pauses every 30 or so sec


Had this problem that degraded into a frozen player within 1 DVD with the error H02. See: http://www.fixya.com/support/t115888-dvd_not_playing_message_say_h02

Mar 07, 2007 | Panasonic DVD-RV31 DVD Player

Not finding what you are looking for?
Panasonic DVD-RV31 DVD Player Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...