CANNON s400 pRINTER

The E03 code indicates (1) That the Paper Output tray is closed and you are trying to print. Open the Paper Output Tray and the printer will resume printing. (2) There is a paper jam. Remove the jam, reload the paper into the printer, then press the "Black" or "Color" button,

It sounds like the exit sensor is sticking, so the printer doesn't know the paper has exited & throws a jam.

For me on my Cannon MX410 with a "paper Jam" light displayed this WORKED!! The absolute BIZZARE thing was after I went and through the described procedure above and rebooted and tried to print the 1st page that came out had a "crushed" ****-roach on the 1st page! So I didn't have a paper jam,...but a
ROACH Jam. :) I told my wife, Humm pest service not workin I guess! It errored out again, but simply unpluggingUSB and power cord (not the steps described for the Print Spooler) it prints fine. SO saved me buying a new printer which was just 6 mos. OLD and FINE by me! So THX, Vikram Kumar Thumu!

FIRST: I THINK THE TEMP. AROUND UR CANNON PRINTER MUST BE COLD , down temp. TRY TO KEEP UR CANNON PRINTER WARM (not more the n room temp, while summers)
2ND : ur cannon printer must having colorfull ink rather then black and white which get JAM fastly in cold days
CHANGE UR INK !!!!!!

i know that happens to me check that everything it as it sould and resated

Hi there,

A possible paper jam has happen on the unit. Did you have an paper jam error before you have this problem?

You must clear any paper jam on the unit, check the unit for any stuck paper or object or check if there was misaligned parts inside.

Let me know for any clarifications.

Thank you for using fixya.

micro-

try turning off the printer for about 10 sec. to clear its memory and turn it back on.. then print again

I had the same problem and just talked with HP technician Neeta and she showed me how to fix it. It's a bit convoluted. In essence you have to clear the print spooler. Here is what she told me.

First you have to be clear that there really ISN'T a paper jam by printing a test message this back door way.

Neeta : The USB cable should be disconnected. Neeta: To print a self-test page, press and hold the Power button. Raise and lower the printer cover four times. Release the Power button, and the self-test page prints

If the sel-test page prints, this means you truly do not have a paper jam. Next, clear the print spooler

Neeta : The USB cable should be disconnected.Neeta : Now click on start->RUN.Neeta : Then type "services.msc".Neeta : Then it will open the services window.Neeta : Now please look for the option "print spooler. Neeta : Okay, now , please right click on the option "print spooler" and click on stop then click on start, 3 times.

IF THIS PROBLEM IS PERSISTING THEN YOU WILL HAVE TO OPEN THE PRINTER AND LOOK FOR ANY KIND OF PAPER BITS STUCK TO THE CORNERS OF THE PRINTER FROM INSIDE

canon i960 -three flashing orange lights (paper jam error) but no paper is jammed. The print cartridge will not slide to center either-- I have tried to get the printer into service mode, but cannot get there because the orange lights never stop flashing.