Question about D-Link DSL 300G+ (DSL-300G+) Modem

1 Answer

Modem and router fault

Why cant i access the web based managment module it just says web page unavailable error 400' it also does this on my router these are both new items although they were purchased late 2005 and have been waiting to be fitted since then

Posted by on

  • conway192 Dec 29, 2007

    tried this one mate managed to get access to the router but still no luck setting up the modem any other ideas please

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 127 Answers

Hi conway192,
your probally trying to access the router with the direct IP, try using the default gateway IP[the one that ends with 0's or 1's
to get the default gateway IP:
goto connections, right click local area connection, click support, then details.

Hope this helps.
jeremy

Posted on Dec 28, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to set up my router with modem?


Connect the router to the modem with an ethernet cable, CAT 5, 6 or 7. Try amazon.

Jul 19, 2016 | TP-LINK Computers & Internet

1 Answer

NSN 1600, restored to factory settings, no internet access, internet light blinking fine, help


Some people find configuring Nokia Siemens Residential Router 1600 with BSNL is a little difficult. So I would like to present a tutorial to setup Internet connection with BSNL using Nokia Siemens Residential Router 1600. Just like other BSNL modem/ router models, we do not need any setup disc to configure Nokia Siemens Residential Router 1600. All we need is to follow some simple steps and adding some values. We can also setup wireless and wireless security from the web based setup page Configure Nokia Siemens Residential Router 1600 In order to configure Nokia Siemens Residential Router 1600 with BSNL follow the steps below.

1. Connect Nokia Siemens Residential Router 1600 to computer using Ethernet cable

2. Power on Nokia Siemens Residential Router 1600

3. Type 192.168.1.1 on address bar of Internet Explorer and press enter

USER Name: admin
Password : admin

Now you can access the web based setup page of Nokia Siemens Residential Router 1600.

Apr 09, 2013 | Computers & Internet

2 Answers

How can i change my password in wifi?


You need to access your wireless modem to change that password. Due to the large amount of modem brands', I can help you if you provide what type of modem you have. From there I can guide you step by step to complete this.
Regards,
Nico

Jul 06, 2011 | Computers & Internet

1 Answer

Cant connect to internet


Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.


If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 19, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Cant log on to router


If you have forgotten your router's password, please follow the instructions below to resolve your issue.

The router can be set to factory default by pressing the Reset button of the router and resetting through the router's web-based setup page. Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. Any settings on the router will be erased and the router's IP address will become "192.168.1.1," the username is still blank, and the password will be "admin."

To perform a hardware reset on your Linksys router follow the steps below.
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the device before resetting.
Step 2:
Press the Reset button of the router for 30 seconds.

3798-001.png Figure 1: Location of the Reset button of a Linksys BEFW11S4 router.
NOTE: If your router does not look like this, refer to the other images below:
4030-022.png Figure 2: Location of the Reset button of a Linksys WRT54GX router.
4030-024.png Figure 3: Location of the Reset button of a Linksys WRT54GC router.
NOTE: If the image of your router is different from the ones shown above, please consult your router documentation.
Step 3:
If the normal reset does not work, unplug then plug back the router's power adapter while pressing the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: If you are using Mac to access the router's web-based setup page, click here.
Step 2:
When the router's web-based setup page appears, click Administration then Factory Defaults.
4008-003.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Look for Restore Factory Defaults and select Yes.
4008-005.png Step 4:
Click 4268-009.png.

Nov 11, 2010 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

When my pc starts I get an error message concerning something missing in the dynamic link library. How do i fix this?


Try:
Resetting the Linksys Router to Factory Default

The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.

3798-001.png

Figure 1: Location of the Reset button on a Linksys BEFW11S4 router.
NOTE: The image may vary depending on the model number of the Linksys device.

4030-022.png

Figure 2: Location of the Reset button on a Linksys WRT54GX router.

4030-024.png

Figure 3: Location of the Reset button on a Linksys WRT54GC router.
NOTE: If the image of your router looks different from the ones shown above, consult your router documentation.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Administration then click on Factory Defaults.

kb4008-004_en.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Click on Restore Factory Defaults and select Yes.

kb4008-005_en.png Step 4:
Click OK.

kb4008-006_en.png


Related Articles:

Accessing the Router's Web-Based Setup Page
Setting-Up a Router with Cable Internet Service
Setting-Up a Linksys Router Using DSL Internet
Changing the Linksys Router's Password

Nov 08, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

How do I set password so people cant tapp into my wireless connection


you need to go to the security settings of your wireless access point and set up web key. Steps are below:
Step 1:
Access the access point’s web-based setup page.
Step 2:
Look for Wireless Security.
Step 3:
Look for Security Mode and select WEP.
Step 4:
Look for the WEP Encryption and select.

Put the desired password and remember it.

Nov 26, 2009 | Arris Computers & Internet

1 Answer

Asus wl-500w and modem


your sub net mask is wrong you have to put 255.255.255.0 and make 192.168.1.1 to modem and 192.168.2.1 to router

Apr 11, 2009 | ASUS WL-500W Router (WL500W)

1 Answer

I am trying to install an HP 7460 wireless printer to my HP cpu via a linksys router. My password for the router is 7 letters, and the printer says it has to be 8 letters. How do I change the router...


When accessing the router’s web-based setup page, a log-in screen will appear asking for the router’s password. The router’s default password is “admin.” You should change the password for security purposes.
The router’s password must be changed to:
  • Prevent unwanted users from accessing the router’s web-based setup page.
  • Enable Remote Management.
The router’s IP password can be changed by:
  • Running the router’s setup CD.
  • Changing it on the router’s web-based setup page. For instructions, please follow the steps below.
Changing the Router’s Password
Step 1:
Access the router’s web-based setup page.
NOTE: If you are using Mac to access the router's web-based setup page.
Step 2:
When the router’s web-based setup page appears, click Administration.
Step 3:
Enter the new password on the Password and Re-enter to confirm fields.

Sep 26, 2008 | Office Equipment & Supplies

1 Answer

No access to set up modem or router


you might have configured your lan settings wrongly.

If your modem was setup for DHCP then you configure your lan to receive IP address automatically, DNS automatically.

If DHCP is disabled on the modem, you have to USE static IP Address for your lan ip and default gateway should be your modem default ip.

the default IP for modem is usually 192.168.1.1
if DHCP is disabled on the modem the sys ip is 192.168.1.3

So Configure your LAN setting as follow and Type http://192.168.1.1 in the address url.

Lan Settings:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

click ok.
and type the above url, press enter the modem will ask you for username and password.

Good Luck.

Dec 27, 2007 | D-Link DSL 300G+ (DSL-300G+) Modem

Not finding what you are looking for?
D-Link DSL 300G+ (DSL-300G+) Modem Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...