Question about One For All URC4110 Remote Control
I have a TV, VCR and DVD player - all Panasonic. I also have a satellite connection.
I managed to connect the remote only to the TV using the first code on the Panasonic section. Do I have to find another COMMON code that will make work the 3 devices at one time through the TV? Or do I have to find a code for the VCR and DVD individually pressing the the respective buttons rather than the TV button? The satellite connection works fine.
Each unit needs a different code. If all the units operated from with the same code, when you switched on your TV the other units would also switch on even if you were not going to use them. The way to set up your One For All, is to find three different codes, then set up some of the functions such as the TV volume control to work common with all three units so you do not have to keep switching remote between them. To use the main functions on each unit, you will have to select them separately with the remote controller. Visit the One For All website, you will find it easily using Google. Have fun...
Posted on Dec 27, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
Mar 20, 2011 | One For All URC-3021 Remote Control
Mar 04, 2011 | One For All URC-3021 Remote Control
Feb 25, 2011 | One For All URC-3021 Remote Control
Feb 12, 2011 | One For All URC-4021 Remote Control
Dec 27, 2007 | One For All URC-3445 Remote Control
Nov 26, 2007 | One For All URC-3021 Remote Control
Aug 19, 2007 | One For All URC-3021 Remote Control
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: